Search
Now showing items 1-10 of 93
Yeşil limanlarda performans kriterlerinin değerlendirilmesi üzerine nicel bir araştırma
(İskenderun Teknik Üniversitesi / Mühendislik ve Fen Bilimleri Enstitüsü / Deniz Ulaştırma Mühendisliği Anabilim Dalı, 2020)
Dünya ticaretinde büyük payı olan deniz taşımacılığı, ülkelerin dışa açılan kapısı konumundaki limanların önemini arttırmaktadır. Ticaretin artması liman operasyonlarının artması anlamına gelmektedir, bu da limanlardaki ...
Microstructural alteration of alkali activated slag mortars depend on exposed high temperature level
(Elsevier, 2016)
This article reports a study on the microstructural and mechanical properties of the Alkali Activated Slag mortars (MS) upon exposing to the elevated temperatures up to 800 degrees C. Slag cement is activated by sodium ...
MLR & ANN approaches for prediction of compressive strength of alkali activated EAFS
(Techno Press, 2018)
In this study alkali activation of Electric Arc Furnace Slag (EAFS) is studied with a comprehensive test program. Three different silicate moduli (1-1,5-2), three different sodium concentrations (4%-6%-8%) for each silicate ...
Examining the receiver heat loss, parametric optimization and exergy analysis of a solar power tower (SPT) system
(Taylor & Francis, 2020)
Thanks to the studies on the material properties of the future solar tower systems and together with the developments in the material science, it has been observed that higher operating temperatures can be possible for SPT ...
Deep neural network approach to estimation of power production for an organic Rankine cycle system
(Springer, 2020)
In this study, the possibility of using Stepwise multilinear regression and deep learning models to estimate the behaviour of the organic Rankine cycle (ORC) has been investigated. It was found that a number of parameters ...
High temperature wear behavior of the surface-modified externally cooled rolls
(Elsevier, 2018)
Externally cooled rolls of a steel plant were coated using three different surface modification techniques, namely titanizing, boronizing and borotitanizing. The grown coatings were examined using optical microscopy, ...
Thiadiazoloquinoxaline and benzodithiophene bearing polymers for electrochromic and organic photovoltaic applications
(Taylor & Francis Ltd, 2019)
Two novel thiadiazoloquinoxaline and benzodithiophene (BDT) bearing copolymers were designed and synthesized. Different BDT units (alkoxy and thiophene substituted) were used as donor materials and the effect of alkoxy and ...
A review of magnetically controlled shunt reactor for power quality improvement with renewable energy applications
(Elsevier, 2017)
Renewable energy sources are widely available on Earth; hence they have attracted much interest in both research and practical applications. In the large scale renewable energy system, power quality into the grid, especially ...
A novel application of pulse width modulation technique on hydroxy gas production
(Elsevier, 2019)
Software and hardware advancements on a hydroxy gas (HHO) production system is presented in this experimental study. A unique control system that enables to generate hydroxy gas at the specified volumetric flow rates with ...
Novel Metamaterials-Based Hypersensitized Liquid Sensor Integrating Omega-Shaped Resonator with Microstrip Transmission Line
(Mdpi, 2020)
In this paper, a new metamaterials-based hypersensitized liquid sensor integrating omega-shaped resonator with microstrip transmission line is proposed. Microwave transmission responses to industrial energy-based liquids ...
