Ara
Toplam kayıt 12, listelenen: 1-10
Examining the receiver heat loss, parametric optimization and exergy analysis of a solar power tower (SPT) system
(Taylor & Francis, 2020)
Thanks to the studies on the material properties of the future solar tower systems and together with the developments in the material science, it has been observed that higher operating temperatures can be possible for SPT ...
Broad band MA-based on three-type resonator having resistor for microwave energy harvesting
(Taylor and Francis Inc., 2017)
We proposed metamaterial absorber having multi-type split coin resonator based on resistive loads. The numerical simulation results and experimental measurements indicate that broad band absorption with a ratio over 80% ...
Wideband metamaterial absorber based on CRRs with lumped elements for microwave energy harvesting
(Taylor & Francis, 2018)
A novel metamaterial absorber structure is designed and characterized for microwave energy harvesting. The suggested structure is composed of two circular ring resonators with different dimensions. Due to harvesting ...
Improvement of energy harvesting capability in grid-connected photovoltaic micro-inverters
(Taylor & Francis, 2020)
In this paper, a multi-stage micro-inverter system depending on a dual neutral point clamped (D-NPC) inverter is developed for low power photovoltaic (PV) applications. The primary objectives of this study are determined ...
Pyrolysis of waste pomegranate peels for bio-oil production
(Taylor & Francis, 2018)
In order to obtain bio-oil from the pomegranate peel which is a by-product of juice production process, the dried pomegranate peel was pyrolyzed at a heating rate of 10 degrees C/min and different temperatures between 400 ...
Zero-sequence current injection based power flow control strategy for grid inverter interfaced renewable energy systems
(Taylor & Francis, 2020)
This paper deals with an energy management issue for the grid-connected
renewable energy sources connected with unbalanced loads. In the gridconnected energy systems, conventional energy management methods are
used to ...
Electrochemical Detection of Atrazine by Platinum Nanoparticles/Carbon Nitride Nanotubes with Molecularly Imprinted Polymer
(American Chemical Society, 2017)
In this Article, a new electrochemical sensor based on molecular imprinting polymer (MIP) and platinum nanoparticles (Pt NPs)/carbon nitride nanotubes (C3N4 NTs) nanocomposite was developed for atrazine (ATR) analysis. ...
Conceptual design analysis for a lightweight aircraft with a fuel cell hybrid propulsion system
(Taylor and Francis Inc., 2020)
With the ever-growing aviation industry, energy researches on aviation have turned to renewable energy sources providing electric propulsion. Fuel cells are one of the most popular sources of power for electric vehicles ...
Improvement of heavy crude oil via catalytic cracking process for refining into valuable blending stocks
(Taylor and Francis Inc., 2018)
In this study, it was aimed to obtain the conversion of the heavy crude oil with 12.2 degrees API gravity into the liquid fuel-like condensate fractions having different boiling points of gasoline (initial boiling point-180), ...
Liquid fuels from used transformer oil by catalytic cracking using bentonite catalyst
(John Wiley and Sons, 2018)
In this study, the main target was to obtain the liquid fuel-like product from the catalytic cracking of the used transformer oil over bentonite as a low-cost catalyst. For this aim, a series of cracking runs were performed ...