Search
Now showing items 1-10 of 13
High temperature wear behavior of the surface-modified externally cooled rolls
(Elsevier, 2018)
Externally cooled rolls of a steel plant were coated using three different surface modification techniques, namely titanizing, boronizing and borotitanizing. The grown coatings were examined using optical microscopy, ...
A Comparative Study on the Effects of Different Thermochemical Coating Techniques on Corrosion Resistance of STKM-13A Steel
(Springer, 2018)
The corrosion resistances of three different thermochemical coatings (grown using titanizing, boriding, and borotitanizing treatments) applied to STKM-13A steel surfaces were investigated. The coatings were characterized ...
Dry sliding wear behavior of bonded hot-work tool steel at elevated temperatures
(Elsevier Science, 2017)
In the present study, the surface of AISI H13 hot-work tool steel was bonded with EKabor II powders using powder pack-bonding method. The process was carried out at 800,900 and 1000 degrees C temperatures for 2,4 and 6 h ...
Properties and Corrosion Behavior of Chromium and Vanadium Carbide Composite Coatings Produced on Ductile Cast Iron by Thermoreactive Diffusion Technique
(ASME, 2020)
Ductile iron (DI) owes many of its attractive mechanical properties to the graphite nodules in its structure. However, since galvanic coupling can occur between the graphite nodules and the matrix in aggressive environments, ...
Microstructural and mechanical properties of friction stir welded pure lead
(National Institute of Science Communication and Information Resources (NISCAIR), 2018)
The present study focuses on the applicability of friction stir welding to pure Pb plates. The joint performances are evaluated by optical microscopy, microhardness measurements, notch impact tests and three point bending ...
Effect of borotitanizing on microstructure and wear behavior of Inconel 625
(Elsevier, 2017)
Inconel 625, a nickel-based superalloy, is used in a wide range of applications including the marine and petroleum industries under where it is subjected to harsh conditions such as high temperatures and highly corrosive ...
Determination of Barreling of Aluminum Solid Cylinders During Cold Upsetting Using Genetic Algorithm
(UNIV FED RIO DE JANEIRO, LAB HIDROGENIO, 2019)
This study presents Genetic Programming models for the formulation of barreling of aluminum solid cylinders during cold upsetting based on experimental results. The maximum and minimum radii of the barreled cylinders having ...
Effect of thermal degradation on the properties and wear behavior of Cr−V−C composite coatings grown on ductile iron
(Elsevier, 2021)
The thermal fatigue behavior of chromium vanadium carbide (Cr - V - C) coatings and the wear of the coatings after thermal fatigue cycling was studied. The Cr - V - C coatings were grown on the surface of a ductile iron ...
The effect of nanoparticle additive on surface milling in glass fiber reinforced composite structures
(SAGE Publications, 2021)
In this study, the effect of adding nanosize additive to glass fiber reinforced composite plates on mechanical properties and surface milling was investigated. In the light of the investigations, with the addition of MWCNTs ...
Effect of boronizing on microstructure, high-temperature wear and corrosion behavior of additive manufactured Inconel 718
(Elsevier, 2022)
In this study, Ni-based Inconel 718 coatings were additively manufactured on the surface of AISI H13 work tool steel by electro-spark deposition (ESD). Some of the electro-spark deposited samples were boronized at 1000 ? ...
