Search
Now showing items 1-10 of 11
Microstructural alteration of alkali activated slag mortars depend on exposed high temperature level
(Elsevier, 2016)
This article reports a study on the microstructural and mechanical properties of the Alkali Activated Slag mortars (MS) upon exposing to the elevated temperatures up to 800 degrees C. Slag cement is activated by sodium ...
Utilization and efficiency of ground granulated blast furnace slag on concrete properties - A review
(Elsevier, 2016)
Ground granulated blast furnace slag (GGBFS) is a byproduct from the blast-furnaces of iron and it is a very beneficial in the mortar and concrete production. The present paper reviews the literature related to the utilization ...
Tunable perfect metamaterial absorber and sensor applications
(Springer, 2016)
Operation frequencies of traditional metamaterial absorbers are fixed meaning that it is not possible to change that frequency after the fabrication. Therefore, more studies are focused on the design of Tunable metamaterial ...
Removal of Cr(VI) from aqueous solution by pyrolytic charcoals
(Editorial Board of New Carbon Materials, 2016)
Bio-chars produced by the pyrolysis of walnut shells at 450? (BC450) and theco-pyrolysis of walnut shells and 20 wt% tar sand (BCTS20)at the same temperature, were investigated as potential adsorbents for the removal of ...
Determinations of in-situ energy loss factors of point-connected composite plates
(Elsevier, 2016)
Statistical energy analysis is a widely used high frequency vibro-acoustic analysis tool. It is based on power flow balance between subsystems. Its accuracy mainly depends on precise determination of energy loss factors. ...
Failure analysis of newly constructed RC buildings designed according to 2007 Turkish Seismic Code during the October 23, 2011 Van earthquake
(Elsevier, 2016)
In the Van Earthquake of magnitude Mw = 7.2 on October 23, 2011, 48,666 buildings were severely damaged or collapsed, 604 people lost their lives and 1301 people were injured. During this earthquake, not only the buildings ...
Optimum design of alkali activated slag concretes for the low oxygen/chloride ion permeability and thermal conductivity
(Elsevier, 2016)
In this research, individual and interactional effect of curing temperature (CT), curing time (Crime), sodium concentration (SC) and silicate modulus (SM) on the compressive strength, chloride ion permeability, oxygen ...
Fatigue analysis of girth gear of a rotary dryer
(Elsevier, 2016)
This paper describes the fatigue failure of girth gear manufactured from low alloy cast steel of rotary dryer in a chemical plant. The cracks of T-section web of the girth gear occurred at the end of 25 year working period ...
Pullout capacity development of cast in place anchors with embedded studs
(Elsevier, 2016)
In this study, an experimental investigation was conducted on normal strength concrete to examine the pullout capacity variation of cast in place anchors with the embedded circular surrounding studs around the anchored ...
Microstructural and Mechanical Properties of Friction Stir Welded Nickel-Aluminum Bronze (NAB) Alloy
(Springer, 2016)
In this study, the applicability of friction stir welding to cast NAB alloy (i.e., C95800) with a thickness of 9 mm has been investigated. The joint performance was determined by conducting optical microscopy, microhardness ...