Now showing items 1-6 of 6
Molecularly imprinted QCM sensor based on delaminated MXene for chlorpyrifos detection and QCM sensor validation
(Royal Society of Chemistry, 2020)
Chlorpyrifos (CHL) is one of the most frequently used broad-spectrum organophosphate insecticides. Especially, its incorrect and uncontrolled usage cause public concern about food and environment safety. In this report, a ...
Electromagnetic Scattering Properties of MWCNTs/Graphene Doped Epoxy Layered with PVC Nanofiber/E-Glass Composites
In this study, composites composed of glass fiber reinforced-epoxy laminates interleaved with electrospun polyvinylchloride (PVC) nano-fibres were designed for radar absorption investigations. The laminated composites which ...
Properties and High-Temperature Wear Behavior of Remelted NiCrBSi Coatings
Remelted NiCrBSi coatings were examined using optical microscopy, scanning electron microscopy, energy dispersive spectroscopy, x-ray diffraction analysis, microhardness and wear testing. After wear tests, the surfaces of ...
Properties and High Temperature Dry Sliding Wear Behavior of Boronized Inconel 718
Silicide-free boride layers were grown on Inconel 718 Ni-based superalloy surface at 850 degrees C, 950 degrees C, and 1050 degrees C for 2, 4, 6 hour by the powder pack-boronizing process using nano-sized B4C powders. The ...
A Comparative Study on the Effects of Different Thermochemical Coating Techniques on Corrosion Resistance of STKM-13A Steel
The corrosion resistances of three different thermochemical coatings (grown using titanizing, boriding, and borotitanizing treatments) applied to STKM-13A steel surfaces were investigated. The coatings were characterized ...
Microstructural alteration of alkali activated slag mortars depend on exposed high temperature level
This article reports a study on the microstructural and mechanical properties of the Alkali Activated Slag mortars (MS) upon exposing to the elevated temperatures up to 800 degrees C. Slag cement is activated by sodium ...