Search
Now showing items 1-10 of 10
Properties and High Temperature Dry Sliding Wear Behavior of Boronized Inconel 718
(Springer, 2020)
Silicide-free boride layers were grown on Inconel 718 Ni-based superalloy surface at 850 degrees C, 950 degrees C, and 1050 degrees C for 2, 4, 6 hour by the powder pack-boronizing process using nano-sized B4C powders. The ...
Mechanical Properties and Corrosion Resistance of Borosintered Distaloy Steels
(Springer, 2020)
Distaloy SA is a sponge iron powder (nominal composition: Fe-1.75Ni-1.5Cu-0.5Mo) widely used in the production of powder metallurgy (P/M) parts in the automotive industry. In this study, Distaloy SA powders were sintered ...
Properties and High-Temperature Wear Behavior of Remelted NiCrBSi Coatings
(Springer, 2020)
Remelted NiCrBSi coatings were examined using optical microscopy, scanning electron microscopy, energy dispersive spectroscopy, x-ray diffraction analysis, microhardness and wear testing. After wear tests, the surfaces of ...
Characterization and wear behavior of TiBC coatings formed by thermoreactive diffusion technique on AISI D6 steel
(Elsevier, 2020)
A two-step Thermo reactive diffusion processes (including an initial titatinizing step followed by boronizing) is proposed in order to obtain superhard complex TiBC coating layer on AISI D6 steel. Microstructural ...
Microstructure, some mechanical properties and tribocorrosion wear behavior of boronized Al0.07Co1.26Cr1.80Fe1.42Mn1.35Ni1.10 high entropy alloy
(Elsevier, 2021)
High-entropy alloys (HEAs) with face-centered cubic (FCC) structures exhibit high toughness and corrosion resistance, but their average strengths and relatively low wear resistance can limit their engineering ap-plications. ...
Effect of Cr Addition on Properties and Tribological Behavior at Elevated Temperature of Boride Layers Grown on Borosintered Powder Metallurgy Alloys
(Korean Institute of Metals and Materials, 2022)
This study focused on chromium addition (0 wt%, 3 wt%, 6 wt%, 9 wt% and 12 wt%) on the boride layer formation, microhardness, fracture toughness and elevated temperature friction and wear behaviour of alloys formed by ...
Effect of boronizing on microstructure, high-temperature wear and corrosion behavior of additive manufactured Inconel 718
(Elsevier, 2022)
In this study, Ni-based Inconel 718 coatings were additively manufactured on the surface of AISI H13 work tool steel by electro-spark deposition (ESD). Some of the electro-spark deposited samples were boronized at 1000 ? ...
Characterization of electrodeposited Ni-Cr/hBN composite coatings
(Elsevier, 2020)
In this study, NieCr/hBN composite coatings with different hBN content were deposited on AISI 1040mild carbon steel using electrodeposition. The coatings were characterized using scanning electronmicroscopy (SEM), energy ...
Development of novel inhibitive water-based drilling muds for oil and gas field applications
(Elsevier, 2022)
The aim of this study is to develop inhibitive drilling fluid systems generated from waste materials that can contribute to the reduction of potential well instability problems caused by drilling fluid based on rheological ...
Titanium carbide coating to improve surface characteristic, wear and corrosion resistance of spheroidal graphite cast irons
(Elsevier, 2022)
In this study, titanium carbide (TiC) coatings were grown on the surface of a spheroidal graphite cast iron (SGI) via thermo-reactive diffusion (TRD) using powder-pack processing at 800 °C, 850 °C and 900 °C for 4 h. The ...
