Ara
Toplam kayıt 20, listelenen: 11-20
Microabrasion Wear Behavior of Fast-Borided Steel Tooth Drill Bits
(Taylor and Francis Inc., 2017)
In this study, the surface of steel tooth drill bits (Ni-Cr-Mo based) was subjected to the solid-state boriding treatment with 10- to 50-nm nanoboron powder. Boriding processes were carried out at a constant temperature ...
Boride Layer Growth Kinetics Of Aisi H13 Steel Borided With Nano-Sized Powders
(Polish Academy Sciences, Institute Metallurgy & Materials Sciences, 2018)
Growth kinetics of boride layers in AISI H13 steel was investigated using the pack bonding method at temperatures of 1073, 1173 and 1273 K (800 degrees C, 900 degrees C and 1000 degrees C) for periods of 2, 4 and 6 h with ...
Properties and tribological performance of ceramic-base chromium and vanadium carbide composite coatings
(Elsevier, 2019)
In the current study, the surface of AISI D2 steel was coated with the powder blends of ferro-vanadium (Fe-V) and ferro-chromium (Fe-Cr). The coatings were performed using a thermo-reactive diffusion (TRD) treatment by the ...
Microstructural and mechanical properties of friction stir welded pure lead
(National Institute of Science Communication and Information Resources (NISCAIR), 2018)
The present study focuses on the applicability of friction stir welding to pure Pb plates. The joint performances are evaluated by optical microscopy, microhardness measurements, notch impact tests and three point bending ...
Friction and wear behavior of epoxy composite filled with industrial wastes
(Elsevier Sci Ltd, 2019)
Waste utilization is an important alternative to reduce disposal costs, potential environmental pollution problems, decrement of natural resources and production costs. In this study, it is aimed to create a different usage ...
Effect of borotitanizing on microstructure and wear behavior of Inconel 625
(Elsevier, 2017)
Inconel 625, a nickel-based superalloy, is used in a wide range of applications including the marine and petroleum industries under where it is subjected to harsh conditions such as high temperatures and highly corrosive ...
Farklı bor kimyasalları ile borlanmış Inconel 625 alaşımının karakterizasyonu
(Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 2017)
Bu çalışmada, nikel bazlı süper alaşımlar içerisinde endüstride yaygın olarak kullanılan Inconel 625 alaşımı 3 farklı borlama tozu ile borlanmıştır. Kullanılan borlama tozları, %90 elementel nano bor tozu + %10 NaBF4 (NB), ...
Determination of Barreling of Aluminum Solid Cylinders During Cold Upsetting Using Genetic Algorithm
(UNIV FED RIO DE JANEIRO, LAB HIDROGENIO, 2019)
This study presents Genetic Programming models for the formulation of barreling of aluminum solid cylinders during cold upsetting based on experimental results. The maximum and minimum radii of the barreled cylinders having ...
Effects of blanking speed on the shear surface of mild steel (St37)
(Polish Academy of Sciences, 2016)
Blanking operation is widely used to cut sheet or plates by a shearing process between punch and die. The process of shearing and the conditions of the sheared surface are influenced by the punch, the die, the speed of ...
A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM
(Sakarya University Journal of Science, 2019)
The Wire Electrical Discharge Machining (Wire EDM) is widely used in the cutting of Bulk Continuous Filament (BCF) spinneret molds. Because of the low surface roughness of the spinneret molds obtained by the Wire EDM method, ...