Başlık için Makale Koleksiyonu listeleme
Toplam kayıt 126, listelenen: 6-25
-
Characteristics, high temperature wear and oxidation behavior of boride layer grown on nimonic 80A Ni-based superalloy
(Elsevier, 2021)Nickel-based superalloy Nimonic 80A was pack-borided in a solid medium at temperatures of 850 degrees C and 950 degrees C for 2 h and 4 h using silicon-free boriding powders. To investigate the effects of the boriding ... -
Characteristics, high temperature wear and oxidation behavior of boride layer grown on nimonic 80A Ni-based superalloy
(Elsevier, 2021)Nickel-based superalloy Nimonic 80A was pack-borided in a solid medium at temperatures of 850 degrees C and 950 degrees C for 2 h and 4 h using silicon-free boriding powders. To investigate the effects of the boriding ... -
Characterization and wear behavior of TiBC coatings formed by thermoreactive diffusion technique on AISI D6 steel
(Elsevier, 2020)A two-step Thermo reactive diffusion processes (including an initial titatinizing step followed by boronizing) is proposed in order to obtain superhard complex TiBC coating layer on AISI D6 steel. Microstructural ... -
Characterization of atomic layer deposition coated cutting tools by X-ray photoelectron spectroscopy and examination of cutting performance
(Taylor & Francis Inc, 2019)The performance of cutting tools was examined, involving synthesis of a 10 nm thin film of Aluminum oxide using atomic layer deposition. Characterization of coated and uncoated cutting tools was done by several methods. ... -
Characterization of electrodeposited Ni-Cr/hBN composite coatings
(Elsevier, 2020)In this study, NieCr/hBN composite coatings with different hBN content were deposited on AISI 1040mild carbon steel using electrodeposition. The coatings were characterized using scanning electronmicroscopy (SEM), energy ... -
Chemiresistive CuO sensors for label-free C-reactive protein detection
(Elsevier, 2022)In this study, we developed fast and highly sensitive, label-free Ca-doped cupric oxide (CuO) based che-miresistive biosensors to detect C-reactive protein (CRP). The Successive Ionic Layer Adsorption and Reaction (SILAR) ... -
A Comparative Study on Characterization and High-Temperature Wear Behaviors of Thermochemical Coatings Applied to Cobalt-Based Haynes 25 Superalloys
(MDPI, 2023)This study investigated the characteristic properties of aluminizing, boronizing, and boro-aluminizing coatings grown on Haynes 25 superalloys and their effects on the high-temperature wear behavior. The coating processes ... -
A comparative study on drillability of Inconel 625 alloy fabricated by wire arc additive manufacturing
(Elsevier, 2023)In recent years, the cost-effective wire arc additive manufacturing (WAAM) method is increasingly replacing traditional production methods for Ni-based superalloys. However, the effect of high heat input and elemental ... -
A Comparative Study on Metallographic and Mechanical Properties of Armox 500T Armor Steel Plates Joined Using Different Arc Welding Methods
(Springer, 2022)This study comparatively investigated how the metallographic and mechanical properties of Armox 500T armor steel plates joined with Hybrid Plasma Arc Welding (HPAW), Gas Metal Arc Welding (GMAW), and Cold Metal Transfer ... -
A Comparative Study on the Effects of Different Thermochemical Coating Techniques on Corrosion Resistance of STKM-13A Steel
(Springer, 2018)The corrosion resistances of three different thermochemical coatings (grown using titanizing, boriding, and borotitanizing treatments) applied to STKM-13A steel surfaces were investigated. The coatings were characterized ... -
The cooling rate effect on structure and flux pinning force of FeTeSe single crystal deposited by self-flux method
(Springer, 2018)Synthesis and characterization of FeTe0.5Se0.5 single crystals prepared by self-flux technique with two different cooling rates of 1.45 and 5.83 a"integral/h have been investigated. The XRD results show that the samples ... -
Detail investigation of thermoelectric performance and magnetic properties of Cs-doped Bi2Sr2Co2Oy ceramic materials
(Springer, 2021)Bi2Sr2-xCsxCo2Oy materials with 0 <= x <= 0.15, have been fabricated via the classical ceramic technique. XRD results have indicated that undoped and Cs-substituted samples are composed of Bi2Sr2Co2Oy phase as the major ... -
Determination of Barreling of Aluminum Solid Cylinders During Cold Upsetting Using Genetic Algorithm
(UNIV FED RIO DE JANEIRO, LAB HIDROGENIO, 2019)This study presents Genetic Programming models for the formulation of barreling of aluminum solid cylinders during cold upsetting based on experimental results. The maximum and minimum radii of the barreled cylinders having ... -
Determination of fracture toughness of boride layers grown on Co1.21Cr1.82Fe1.44Mn1.32Ni1.12Al0.08B0.01 high entropy alloy by nanoindentation
(Elsevier, 2022)Multiphase boride layers consisting of (CoFe)2B, (Fe0.4Mn0.6)B, Cr2Ni3B6 and (Cr0.4Mn0.6)B were formed on the surface of Co1.21Cr1.82Fe1.44Mn1.32Ni1.12Al0.08B0.01 high entropy alloy by powder-pack boronizing at 900 °C, 950 ... -
Development of novel inhibitive water-based drilling muds for oil and gas field applications
(Elsevier, 2022)The aim of this study is to develop inhibitive drilling fluid systems generated from waste materials that can contribute to the reduction of potential well instability problems caused by drilling fluid based on rheological ... -
Development of ZTO/Ag/ZTO transparent electrodes for thin film solar cells
(Springer, 2022)This article presents the optimization of Zinc Tin Oxide/Silver/Zinc Tin Oxide (ZTO/Ag/ZTO) multilayers to implement them in thin film solar cells as transparent electrodes. To achieve improvements on the performance of ... -
Dry sliding wear behavior of bonded hot-work tool steel at elevated temperatures
(Elsevier Science, 2017)In the present study, the surface of AISI H13 hot-work tool steel was bonded with EKabor II powders using powder pack-bonding method. The process was carried out at 800,900 and 1000 degrees C temperatures for 2,4 and 6 h ... -
Dynamic transition of nanosilicon from indirect to direct-like nature by strain-induced structural relaxation
(AIP Advances, 2021)Silicon nanoclusters exhibit light emission with direct-like ns-mu s time dynamics; however, they show variable synthesis and structure, optical, and electronic characteristics. The widely adopted model is a core-shell in ... -
Effect of B-doping on the morphological, structural and optical properties of SILAR deposited CuO films
(Elsevier, 2020)Herein the deposition and characterization of CuO films with various doping concentrations of boron through the application of the SILAR method are performed. Structural, morphological, and optical properties of the films ... -
Effect of boriding on high temperature tribological behavior of CoCrMo alloy
(Elsevier, 2023)In the present work, CoCrMo alloy surfaces were subjected to powder-pack boriding at 950 & DEG;C for 5-hour and 7 -hour treatment periods. The obtained boride layers were characterized with scanning electron microscopy, ...