Başlık için Makale Koleksiyonu listeleme
Toplam kayıt 126, listelenen: 51-70
-
Farklı bor kimyasalları ile borlanmış Inconel 625 alaşımının karakterizasyonu
(Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 2017)Bu çalışmada, nikel bazlı süper alaşımlar içerisinde endüstride yaygın olarak kullanılan Inconel 625 alaşımı 3 farklı borlama tozu ile borlanmıştır. Kullanılan borlama tozları, %90 elementel nano bor tozu + %10 NaBF4 (NB), ... -
Friction and wear behavior of epoxy composite filled with industrial wastes
(Elsevier Sci Ltd, 2019)Waste utilization is an important alternative to reduce disposal costs, potential environmental pollution problems, decrement of natural resources and production costs. In this study, it is aimed to create a different usage ... -
Graphene nanoplatelet-reinforced high entropy alloys (HEAs) through B4C incorporation: structural, physical, mechanical, and nuclear shielding properties
(Springer, 2023)This study aims to explicate the diverse roles of high entropy alloys within nuclear environments. The study extensively investigates the impact of B4C on the structural, physical, mechanical, and nuclear shielding properties ... -
High temperature wear behavior of the surface-modified externally cooled rolls
(Elsevier, 2018)Externally cooled rolls of a steel plant were coated using three different surface modification techniques, namely titanizing, boronizing and borotitanizing. The grown coatings were examined using optical microscopy, ... -
High-temperature corrosion and oxidation properties of borided CoCrFeNiAl0.5Nb0.5 HEA
(Elsevier, 2023)This study is focused on a detailed investigation of high-temperature corrosion and oxidation behavior of borided CoCrFeNiAl0.5Nb0.5 HEAs, considering their use in advanced engineering applications. CoCrFeNiAl0.5Nb0.5 HEA ... -
The Improving of B2 Aluminium Composite Panel Core Material With Eloxal Sludge By Using Recycling Process
(Technical University of Kosice, 2022)In this study, it is aimed to improving core material by using eloxal sludge for production B2 composite panel. The calcination study of eloxal sludge which arises from anodic oxidation process has a highest Al2O3 percentage ... -
Industrial scale extrusion performance of cryogenically processed DIN 100 Cr6 and DIN 21NiCrMo2 steels
(CSIC Consejo Superior de Investigaciones Cientificas, 2022)The effects of diferent heat and cryogenic (sub-zero) treatment parameters such as temperature and holding time on the microstructure (amount of retained austenite) and hardness of extrusion molds produced from the 21NiCrMo2 ... -
Investigation into the influence of boronizing on the wear behavior of additively manufactured Inconel 625 alloy at elevated temperature
(Springer, 2023)Directed energy deposition (DED) technology is a cost-effective additive manufacturing method widely used in the production of complex-shaped parts made of various engineering alloys as well as superalloys due to its ... -
The Investigation of K Shell X-Ray Fluorescence Parameters for Sulphur Atom in Different 1, 2, 4-Triazoles
(Office Spectroscopy and Spectral Analysis, 2017)The measurement of K shell fluorescence parameters is an easy and practical way to investigate the electronic structures of elements in alloys, compounds or complexes. Since the number of valence electrons will change the ... -
The investigation of K-shell fluorescence parameters of Zn-Fe alloys with different grain size and microstrain values
(Wiley, 2017)It is known that zinc alloys with iron group metals have better corrosion resistance than pure zinc. Owing to the corrosion resistance of these alloys, Zn-Fe coatings are widely used in automotive industry and have excellent ... -
Investigation of mechanical and microstructural performance of alkali activated electrical arc furnace slag mortars
(International Advanced Researches and Engineering Journal, 2019)The production of Portland cement, resulting in the release of CO2 gas, excessive energy and natural resource consumption, has led to search for alternative materials with similar physical and mechanical properties to the ... -
The investigation of microstructure and high temperature mechanical properties of novel Mg-Al-Sn-Ce alloy produced by HPDC
(Taylor and Francis, 2021)Different weight ratios of cerium (0.5, 1 and 2 wt.%) were produced in a controlled atmosphere by High Pressure Die Cast method to Mg-6Al-0.3Mn-1Sn alloy. The influence of cerium on microstructure and high-temperature ... -
Investigation of the effect of addition of Ce (Cerium) to Mg-4Sb-2Al alloy produced by high pressure die casting method
(Gazi Üniversitesi, 2022)Purpose: In this study, it was produced with HPDC by adding Cerium rare element to Mg-4Sb-2Al alloy. The effect of Ce on mechanical properties was explained by the theories of microstructural transformation and new phase ... -
Investigation on impact and DWTT resistance at low temperatures in Nb and Ti micro alloy steels
(Pamukkale Üniversitesi, 2023)Depending on the climatic conditions in which they are used, new generation petroleum pipe steels come up with the need for high strength and excellent toughness. During the transportation of oil and natural gas, these ... -
Investigation on wear mechanisms of boronized AISI 4140 steel
(Scibulcom Ltd., 2017)In this study, AISI 4140 steel was subjected to box boronizing treatment at 1123 K, 1173 K and 1223 K for 2h, 4h, and 6h with commercially EKabor 2 powders. Friction and wear behaviour of the boronized and following worn ... -
Investigations on machinability of Al2O3 reinforced Al6061 metal matrix composites
(Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 2016)In this study, six different MMCs containing Al6061 matrix and Al2O3reinforcements with particle sizes of 32 µm and 66 µm and weight fraction of 10%, 15% and 20% were produced using the vortex method. Machinability ... -
Ionization-induced optical heterogeneity and ion-like direct emission in 1-nm silicon nanoparticle grains: Prospect for fast optical modulation
(American Institute of Physics Inc., 2022)Silicon, a highly symmetric and homogeneous material, does not exhibit fast optical modulation. Recent classical electrodynamics simulations, however, demonstrated transient optical heterogeneity in silicon nanostructures, ... -
Iron oxide-Si nanoparticle magnetic core-shell induced by the interaction of d-orbitals of Fe2+ with reconstructed Si dimer-like defects
(American Institute of Physics Inc., 2020)Redox-type charge exchange between Si nanoparticles and aqueous metal ions m(x+) was recently used to synthesize core-shell nanocomposites in which their functionalities have been integrated. The process requires the ... -
Key properties of inorganic thermoelectric materials-tables (version 1)
(IOP Publishing Ltd, 2022)This paper presents tables of key thermoelectric properties, which define thermoelectric conversion efficiency, for a wide range of inorganic materials. The twelve families of materials included in these tables are primarily ... -
L-1, L-2, and L-3 subshell fluorescence yields: Updated database and new empirical values
(Elsevier, 2016)In this paper, a summary of experimental data published in the period of time between 1955 to february-2016 was presented in a tabular form for L, subshell fluorescence yields (omega(L1), omega(L2) and omega(L3)) taken ...