Ara
Toplam kayıt 115, listelenen: 51-60
Microstructure and mechanical properties of borided CoCrFeNiAl0.25Ti0.5 high entropy alloy produced by powder metallurgy
(Elsevier, 2021)
CoCrFeNiAl0.25Ti0.5 high entropy alloy alloys (HEA), produced by powder metallurgy were subjected to boriding to improve their mechanical properties. Sintering was carried out at 1200 degrees C for 2 h in Ar, and boriding ...
Thermoluminescence properties of strontium doped magnesium tetraborate
(Elsevier, 2019)
It is worth to continuous and systematic investigations related with magnesium tetraborate (MBO) due to its attractive candidate for dosimetric application. The study was done to develop new phosphor with adding strontium ...
M Shell Fluorescence Parameters of Pt, Au and Tl Compounds with Oxygen and Bromide
(Adıyaman University, 2019)
In this study, Mβα X-ray production cross-sections and average M-shell fluorescence yields were determined by using EDXRF at 5.96 keV for Pt, Au and Tl compounds. The photo-peak areas were used for the measurement of M ...
Thermal analysis and wear behavior of shell mold cast and graphite mold cast Mg-4Zn-(x)Zr alloys
(CSIC Consejo Superior de Investigaciones Cientificas, 2021)
The grain refining effect of Zirconium (Zr) is known, nevertheless the effect of Zr amount and its effect on solidification and wear behavior of modified Mg-Zn alloys has not been adequately studied. Mg-4Zn-(x)Zr alloys ...
TTribocorrosion behavior of boronized Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 high entropy alloy
(Elsevier, 2021)
Boride layers were grown on the surface of a Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 high-entropy alloy (HEA) by boronizing at temperatures of 900, 950 and 1000 degrees C for 4 h using nanosized boronizing powders. ...
A Novel and Eco-friendly Approach for the Simultaneous Recovery of Copper and Diamond from Waste Cutting Segments via Electrodissolution/Deposition
(Springer, 2021)
A new approach is brought to diamond recovery from waste cutting segments. Unlike the commonly used hydrometallurgical processes, this approach offers the simultaneous recovery of copper with diamond. Besides, instead of ...
Characteristics, high temperature wear and oxidation behavior of boride layer grown on nimonic 80A Ni-based superalloy
(Elsevier, 2021)
Nickel-based superalloy Nimonic 80A was pack-borided in a solid medium at temperatures of 850 degrees C and 950 degrees C for 2 h and 4 h using silicon-free boriding powders. To investigate the effects of the boriding ...
Detail investigation of thermoelectric performance and magnetic properties of Cs-doped Bi2Sr2Co2Oy ceramic materials
(Springer, 2021)
Bi2Sr2-xCsxCo2Oy materials with 0 <= x <= 0.15, have been fabricated via the classical ceramic technique. XRD results have indicated that undoped and Cs-substituted samples are composed of Bi2Sr2Co2Oy phase as the major ...
A Study on Analysis of Sinter Microstructure and Phase Morphology
(Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 2021)
Sinter is a blast furnace input material obtained by temperature to 900-1200 oC without full melting and adhering to each other with superficial melting. It is considered as a multi-phase material with its heterogeneous ...
Dynamic transition of nanosilicon from indirect to direct-like nature by strain-induced structural relaxation
(AIP Advances, 2021)
Silicon nanoclusters exhibit light emission with direct-like ns-mu s time dynamics; however, they show variable synthesis and structure, optical, and electronic characteristics. The widely adopted model is a core-shell in ...