Ara
Toplam kayıt 5, listelenen: 1-5
A Comparative Study on the Effects of Different Thermochemical Coating Techniques on Corrosion Resistance of STKM-13A Steel
(Springer, 2018)
The corrosion resistances of three different thermochemical coatings (grown using titanizing, boriding, and borotitanizing treatments) applied to STKM-13A steel surfaces were investigated. The coatings were characterized ...
The cooling rate effect on structure and flux pinning force of FeTeSe single crystal deposited by self-flux method
(Springer, 2018)
Synthesis and characterization of FeTe0.5Se0.5 single crystals prepared by self-flux technique with two different cooling rates of 1.45 and 5.83 a"integral/h have been investigated. The XRD results show that the samples ...
Properties and Tribologic Behavior of Titanium Carbide Coatings on AISI D2 Steel Deposited by Thermoreactive Diffusion
(Springer, 2018)
In the present study, the metallographic, mechanical and tribologic behaviors of AISI D2 steel specimens coated with TiC through the titanizing process were investigated. The titanizing treatment was performed at the ...
Microstructural and mechanical properties of friction stir welded pure lead
(National Institute of Science Communication and Information Resources (NISCAIR), 2018)
The present study focuses on the applicability of friction stir welding to pure Pb plates. The joint performances are evaluated by optical microscopy, microhardness measurements, notch impact tests and three point bending ...
Effect of long processing time on microstructure and transport properties of Fe1.1Se alloy produced by chemical vapor transport (CVT) technique
(Springer, 2018)
In this work we present physical, electrical and magnetic properties of beta-Fe1.1Se single crystalline alloys produced by chemical vapor transport technique using short (120 h) and long (700 h) heating processes. The best ...