Ara
Toplam kayıt 10, listelenen: 1-10
High temperature wear behavior of the surface-modified externally cooled rolls
(Elsevier, 2018)
Externally cooled rolls of a steel plant were coated using three different surface modification techniques, namely titanizing, boronizing and borotitanizing. The grown coatings were examined using optical microscopy, ...
Experimental and theoretical study of ultraviolet-induced structural/optical instability in nano silicon-based luminescence
(American Institute of Physics Inc., 2018)
Nano silicon is emerging as an active element for UV applications due to quantum confinement-induced widening of the Si bandgap, amenability to integration on Si, and less sensitivity to temperature. NanoSi-based UV ...
A Comparative Study on the Effects of Different Thermochemical Coating Techniques on Corrosion Resistance of STKM-13A Steel
(Springer, 2018)
The corrosion resistances of three different thermochemical coatings (grown using titanizing, boriding, and borotitanizing treatments) applied to STKM-13A steel surfaces were investigated. The coatings were characterized ...
Wideband luminescence from bandgap-matched Mg-based Si core-shell geometry nanocomposite
(American Institute of Physics Inc., 2018)
We use wet treatment to integrate red-luminescent Si nanoparticles with Mg-based wide-bandgap insulators Mg(OH) and MgO (5.7 and 7.3 eV respectively). In the process, Mg2+ is reduced on Si nanoparticle clusters, while ...
The cooling rate effect on structure and flux pinning force of FeTeSe single crystal deposited by self-flux method
(Springer, 2018)
Synthesis and characterization of FeTe0.5Se0.5 single crystals prepared by self-flux technique with two different cooling rates of 1.45 and 5.83 a"integral/h have been investigated. The XRD results show that the samples ...
Properties and Tribologic Behavior of Titanium Carbide Coatings on AISI D2 Steel Deposited by Thermoreactive Diffusion
(Springer, 2018)
In the present study, the metallographic, mechanical and tribologic behaviors of AISI D2 steel specimens coated with TiC through the titanizing process were investigated. The titanizing treatment was performed at the ...
Boride Layer Growth Kinetics Of Aisi H13 Steel Borided With Nano-Sized Powders
(Polish Academy Sciences, Institute Metallurgy & Materials Sciences, 2018)
Growth kinetics of boride layers in AISI H13 steel was investigated using the pack bonding method at temperatures of 1073, 1173 and 1273 K (800 degrees C, 900 degrees C and 1000 degrees C) for periods of 2, 4 and 6 h with ...
Microstructural and mechanical properties of friction stir welded pure lead
(National Institute of Science Communication and Information Resources (NISCAIR), 2018)
The present study focuses on the applicability of friction stir welding to pure Pb plates. The joint performances are evaluated by optical microscopy, microhardness measurements, notch impact tests and three point bending ...
Effect of long processing time on microstructure and transport properties of Fe1.1Se alloy produced by chemical vapor transport (CVT) technique
(Springer, 2018)
In this work we present physical, electrical and magnetic properties of beta-Fe1.1Se single crystalline alloys produced by chemical vapor transport technique using short (120 h) and long (700 h) heating processes. The best ...
The semi-empirical determination of KLL Auger, Kα1 and Kα2 X-ray line widths for sulfur atom in new 1,2,4-triazol compounds containing thiophene ring
(Elsevier Science, 2018)
In this study K-alpha 1, K-alpha 2 and KLL Auger line widths were determined semi-empirically by using K shell fluorescence yields of sulfur even if K-alpha X-ray lines cannot be resolved in our detector system. The samples ...