Başlık için Makale Koleksiyonu listeleme
Toplam kayıt 114, listelenen: 81-100
-
Obtaining of modified bitumen with optimum quality through mixing of natural bitumen (gilsonite), bitumen and thinner oil
(Springer, 2015)In this research the modified bitumen was obtained from natural bitumen (gilsonite), B160/220 and B50/70 bitumen and thinner oil in different adding amount by weight. Some engineering properties of these materials were ... -
Oil and gas exploration in Seferihisar Uplift (Western Turkey) containing an operable-size gold deposit: Geochemical evidence for the presence of a working petroleum system
(Springer Heidelberg, 2020)In recent studies, the links between hydrocarbon accumulations and gold mineralizations have been examined. According to the results obtained from these studies, it has been reported that gold and hydrocarbons are carried ... -
Optically stimulated luminescence characteristics of BeO nanoparticles synthesized by sol-gel method
(Elsevier, 2018)Optically Stimulated Luminescence (OSL) properties of the sol-gel synthesized nano-powders of Beryllium Oxide (BeO) were investigated. Luminescence properties of BeO nanoparticles are dependent on the crystal structure, ... -
Optimization of Electrochemical Presodiation Parameters of Na-Ion Full Cells for Stable Solid–Electrolyte Interface Formation: Hard Carbon Rods from Waste Firefighter Suits
(Wiley, 2023)Utilizing the synthetic waste of firefighter costumes, rod-shaped hard carbon materials are effectively produced for the first time with over 99% purity, and their structural properties are evaluated using the appropriate ... -
Paleoenvironmental Conditions, Geochemistry and Hydrocarbon Potential of Kızıldere Formation (Hatay-Turkey)
(Parlar Scientific Publications (P S P), 2019)The study area is in Arsuz - HATAY region and the formation characteristics of the clay rocks of Kizildere Formation (Middle - Upper Miocene) and sedimentation environment of formation were investigated in this study. The ... -
Peat and lignite leaching process with tetralin in autoclave to produce oil
(Oficyna Wydawnicza Politechniki Wroclawskiej, 2018)Instead of directly burning a lignite having low calorific value and peat, the Elbistan lignite (L) and the Adiyaman peat (P) were mixed and leached in an autoclave to obtain an oil to not only provide the demand for energy ... -
Preparation and characterization of activated carbons from Lemon Pulp for oxytetracycline removal
(Springer, 2023)This study aims to remove oxytetracycline (OTC) that harms the ecosystem, with activated carbon (LPAC) obtained from Lemon Pulp (LP). Characterization and properties of LPAC were analyzed by Brunauer-Emmett-Teller (BET), ... -
Production and Characterization of Nanobentonite from Sodium Bentonite with Mechanical Grinding
(Parlar Scientific Publications, 2019)Clays can be classified in many ways because of various factors such as the complexity of the clay minerals, foreign substances they contain, and the place and characteristics of their formation. According to mineralogical ... -
Production of an insulation material from carpet and boron wastes
(General Directorate of Mineral Research and Exploration (MTA), 2016)Buildings are large consumers of energy in all countries. In regions with harsh climatic conditions, a substantial share of energy goes to heat and cool buildings. This paper reports an investigation of the insulation ... -
Production of Multi-Walled Carbon Nanotube and Graphene Doped Thermoplastic Polyurethane Fiber and Investigation of Mechanical Properties
(IOP Publishing, 2020)Nowadays nanofibers are used in many areas. Nanofibers produced by electrospinning are required to be porous, large surface area, lightweight and cost effective. In addition to being lightweight, nanofibers must also have ... -
Production of new electromagnetic wave shielder mortar using waste mill scales
(Elsevier, 2020)Electromagnetic (EM) wave shielder mortar can be produced by mixing cement, natural limestone, tap water with mill scale (mill scale-I and mill scale-II) which is one of the biggest disposal area problems of the iron-steel ... -
Pyrolysis of waste pomegranate peels for bio-oil production
(Taylor & Francis, 2018)In order to obtain bio-oil from the pomegranate peel which is a by-product of juice production process, the dried pomegranate peel was pyrolyzed at a heating rate of 10 degrees C/min and different temperatures between 400 ... -
Removal of Cr(VI) from aqueous solution by pyrolytic charcoals
(Editorial Board of New Carbon Materials, 2016)Bio-chars produced by the pyrolysis of walnut shells at 450? (BC450) and theco-pyrolysis of walnut shells and 20 wt% tar sand (BCTS20)at the same temperature, were investigated as potential adsorbents for the removal of ... -
A Review on Wind Power Forecasting Regarding Impacts on the System Operation, Technical Challenges, and Applications
(Wiley, 2022)Wind power forecasting's (WPF) technical improvements exhibit that the smooth forecasting of wind power is essential in executing operational management like energy balance, grid reliability, scheduling maintenance, and ... -
Rheological behavior of activated bentonite suspensions and estimation of flow models using least squares method
(Elsevier, 2023)In this study, bentonite samples were obtained from Wyoming-USA (WB), Eldivan-Çankırı (EB), Reşadiye-Tokat (RB), Niksar-Tokat (NB) and Ünye-Ordu (UB) regions. Then, these were evaluated in two main sections as raw and ... -
The rheological performance of fly ash in inhibitive water-based drilling fluids
(Slovnaft VURUP a.s, 2019)Water-based drilling fluids are the most widely used systems in drilling operations and contain a different type of additive to achieve desired rheological and filtration properties. In this study, an experimental investigation ... -
The Rheology and Performance of Geothermal Spring Water-Based Drilling Fluids
(Wiley-Hindawi, 2019)In this study, the rheological properties and performances of mud prepared with geothermal spring water to be used by geothermal drilling operators were examined at ambient and elevated temperatures. In this context, mud ... -
Selective Copper Recovery with HCl Leaching from Copper Oxalate Material
(Springer Heidelberg, 2020)In this study, recovery of copper from solid material (obtained by leaching of chalcopyrite with oxalic acid in the presence of hydrogen peroxide) with a copper oxalate structure was carried out selectively using HCl. The ... -
The semi-empirical determination of KLL Auger, Kα1 and Kα2 X-ray line widths for sulfur atom in new 1,2,4-triazol compounds containing thiophene ring
(Elsevier Science, 2018)In this study K-alpha 1, K-alpha 2 and KLL Auger line widths were determined semi-empirically by using K shell fluorescence yields of sulfur even if K-alpha X-ray lines cannot be resolved in our detector system. The samples ... -
Significant enhancement of superconducting performances of Bi-2212 fibers through combined sodium substitution and LFZ process
(Springer, 2021)This paper reports the microstructure, magnetoresistivity, electrical and superconducting properties of Bi-2212 fibers with Na+ ions incorporated into a superconducting matrix prepared by a polymer solution method and ...