Konu "High entropy alloy" için Fakülteler listeleme
Toplam kayıt 6, listelenen: 1-6
-
Effect of the boriding environment on the wear response of laser-clad AlCoCrFeNi high entropy alloy coatings
(Elsevier, 2022)Laser-clad AlCrFeCoNi high entropy alloy (HEA) coatings, produced on the surface of AISI 316 L stainless steel, were pack-borided at 1000 °C for 4 h in open air, high-purity Ar and vacuum environments. The HEA, which had ... -
High-temperature corrosion and oxidation properties of borided CoCrFeNiAl0.5Nb0.5 HEA
(Elsevier, 2023)This study is focused on a detailed investigation of high-temperature corrosion and oxidation behavior of borided CoCrFeNiAl0.5Nb0.5 HEAs, considering their use in advanced engineering applications. CoCrFeNiAl0.5Nb0.5 HEA ... -
Microstructure and mechanical properties of borided CoCrFeNiAl0.25Ti0.5 high entropy alloy produced by powder metallurgy
(Elsevier, 2021)CoCrFeNiAl0.25Ti0.5 high entropy alloy alloys (HEA), produced by powder metallurgy were subjected to boriding to improve their mechanical properties. Sintering was carried out at 1200 degrees C for 2 h in Ar, and boriding ... -
Microstructure, some mechanical properties and tribocorrosion wear behavior of boronized Al0.07Co1.26Cr1.80Fe1.42Mn1.35Ni1.10 high entropy alloy
(Elsevier, 2021)High-entropy alloys (HEAs) with face-centered cubic (FCC) structures exhibit high toughness and corrosion resistance, but their average strengths and relatively low wear resistance can limit their engineering ap-plications. ... -
TTribocorrosion behavior of boronized Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 high entropy alloy
(Elsevier, 2021)Boride layers were grown on the surface of a Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 high-entropy alloy (HEA) by boronizing at temperatures of 900, 950 and 1000 degrees C for 4 h using nanosized boronizing powders. ... -
WEDM machining of MoNbTaTiZr refractory high entropy alloy
(Elsevier, 2022)Refractory high entropy alloys (RHEAs) have shown great promise for a multitude of advanced engineering applications due to their high mechanical stability from cryogenic temperatures to 1600 °C. However, the low ductility ...