Konu "High entropy alloys" için Fakülteler listeleme
Toplam kayıt 12, listelenen: 1-12
-
Boron nitride nanosheet-reinforced WNiCoFeCr high-entropy alloys: the role of B4C on the structural, physical, mechanical, and radiological shielding properties
(Springer, 2022)The synthesis and extensive characterization of newly developed boron nitride nanosheet (BNNSs)-reinforced WNiCoFeCr high-entropy alloys (HEAs) are presented. The influence of B4C on the structural, physical, mechanical, ... -
Determination of fracture toughness of boride layers grown on Co1.21Cr1.82Fe1.44Mn1.32Ni1.12Al0.08B0.01 high entropy alloy by nanoindentation
(Elsevier, 2022)Multiphase boride layers consisting of (CoFe)2B, (Fe0.4Mn0.6)B, Cr2Ni3B6 and (Cr0.4Mn0.6)B were formed on the surface of Co1.21Cr1.82Fe1.44Mn1.32Ni1.12Al0.08B0.01 high entropy alloy by powder-pack boronizing at 900 °C, 950 ... -
Effect of the boriding environment on the wear response of laser-clad AlCoCrFeNi high entropy alloy coatings
(Elsevier, 2022)Laser-clad AlCrFeCoNi high entropy alloy (HEA) coatings, produced on the surface of AISI 316 L stainless steel, were pack-borided at 1000 °C for 4 h in open air, high-purity Ar and vacuum environments. The HEA, which had ... -
Graphene nanoplatelet-reinforced high entropy alloys (HEAs) through B4C incorporation: structural, physical, mechanical, and nuclear shielding properties
(Springer, 2023)This study aims to explicate the diverse roles of high entropy alloys within nuclear environments. The study extensively investigates the impact of B4C on the structural, physical, mechanical, and nuclear shielding properties ... -
Harmonic response analysis of an impeller of a gas turbine engine which modelled by using high entropy alloy materials
(Gümüşhane Üniversitesi, 2022)One of the problems in a gas turbine’s impeller design is to predict the frequency-stress response caused by the harmonic force resulted from the unbalanced mass. To avoid from impeller’s flaws that may occur, designers ... -
High-temperature corrosion and oxidation properties of borided CoCrFeNiAl0.5Nb0.5 HEA
(Elsevier, 2023)This study is focused on a detailed investigation of high-temperature corrosion and oxidation behavior of borided CoCrFeNiAl0.5Nb0.5 HEAs, considering their use in advanced engineering applications. CoCrFeNiAl0.5Nb0.5 HEA ... -
Microstructure and mechanical response of novel Co-free FeNiMnCrAlTi high-entropy alloys
(Elsevier, 2023)The present study investigates the microstructure and mechanical properties of the Co-free FeNiMnCrAlTi high-entropy alloy (HEA) after casting, homogenizing heat treatment, and hot rolling. The results show that the dendrite ... -
Microstructure, some mechanical properties and tribocorrosion wear behavior of boronized Al0.07Co1.26Cr1.80Fe1.42Mn1.35Ni1.10 high entropy alloy
(Elsevier, 2021)High-entropy alloys (HEAs) with face-centered cubic (FCC) structures exhibit high toughness and corrosion resistance, but their average strengths and relatively low wear resistance can limit their engineering ap-plications. ... -
Powder-pack boronizing of CoCrFeNiAl0.5Nb0.5 HEA: Modeling of kinetics, microstructural, mechanical, and tribological characterizations
(Elsevier, 2022)This study is dedicated to the detailed investigation of boronization kinetic, microstructural, mechanical, and wear properties of high entropy alloys (HEAs) considering their sluggish diffusion effect properties. A ... -
TTribocorrosion behavior of boronized Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 high entropy alloy
(Elsevier, 2021)Boride layers were grown on the surface of a Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 high-entropy alloy (HEA) by boronizing at temperatures of 900, 950 and 1000 degrees C for 4 h using nanosized boronizing powders. ... -
WEDM machining of MoNbTaTiZr refractory high entropy alloy
(Elsevier, 2022)Refractory high entropy alloys (RHEAs) have shown great promise for a multitude of advanced engineering applications due to their high mechanical stability from cryogenic temperatures to 1600 °C. However, the low ductility ... -
Wire electric discharge machining and its effect on the surface finish of HfNbTaTiZr refractory high-entropy alloy
(Springer, 2023)Refractory high-entropy alloys (RHEAs) have high strength and hardness but limited plasticity at room temperature, making them challenging to process and shape using conventional techniques. In the current study, HfNbTaTiZr ...