Ara
Toplam kayıt 25, listelenen: 1-10
Synthesis and characterization of whitlockite from sea urchin skeleton and investigation of antibacterial activity
(Elsevier, 2021)
In the present study, undoped whitlockite and ZnO doped-Whitlockite, which is the second most abundant inorganic material in bone structure, were synthesized from sea urchin skeleton. The obtained bioceramic ma-terials ...
Microstructural, wear and corrosion characteristics of boronized AISI 904L superaustenitic stainless steel
(Elsevier, 2021)
AISI 900 series stainless steels are considered as low-cost alternatives to nickel-based superalloys used for highly corrosive environments. However, in terms of mechanical properties, they have average strength and hardness ...
Characteristics, high temperature wear and oxidation behavior of boride layer grown on nimonic 80A Ni-based superalloy
(Elsevier, 2021)
Nickel-based superalloy Nimonic 80A was pack-borided in a solid medium at temperatures of 850 degrees C and 950 degrees C for 2 h and 4 h using silicon-free boriding powders. To investigate the effects of the boriding ...
A novel electrochemical lung cancer biomarker cytokeratin 19 fragment antigen 21-1 immunosensor based on Si3N4/MoS2incorporated MWCNTs and core-shell type magnetic nanoparticles
(Royal Society of Chemistry, 2021)
Lung cancer is one of deadliest and most life threatening cancer types. Cytokeratin 19 fragment antigen 21-1 (CYFRA 21-1) is a significant biomarker for the diagnosis of non-small cell lung cancer (NSCLC). Due to these ...
Compressive strength prediction models for cementitious composites with fly ash using machine learning techniques
(Elsevier, 2021)
In this study, it was proposed a novel prediction model to predict compressive strength of mortar samples having different properties. For this purpose, 8 different fly ashes were used in mortar mixture as a replacement ...
Radio-wave absorption by aluminum and its dependence on the absorption distance
(Springer, 2021)
The absorption of radio wave is relevant to electromagnetic interference (EMI) shielding and low observability. The effect of the absorption distance much above the calculated skin depth on the absorption of radio wave ...
Effect of Lanthanum on mechanical and wear properties of high-pressure die-cast Mg-3Al-3Sn-3Sb alloy
(Walter de Gruyter GmbH, 2021)
In the present study, the effect of an La alloying element with different quantities (1, 3 and 5 wt.-%) on the microstructure, mechanical and dry sliding wear properties of Mg-3Al-3Sn-3Sb alloy was investigated. The wear ...
Microstructure and mechanical properties of borided CoCrFeNiAl0.25Ti0.5 high entropy alloy produced by powder metallurgy
(Elsevier, 2021)
CoCrFeNiAl0.25Ti0.5 high entropy alloy alloys (HEA), produced by powder metallurgy were subjected to boriding to improve their mechanical properties. Sintering was carried out at 1200 degrees C for 2 h in Ar, and boriding ...
Uniaxial stress-strain relation for low- and normal-strength concrete in compression
(ICE Publishing, 2021)
In the modelling and simulation of reinforced concrete structures, accurate definition of material properties is important in terms of obtaining precise results. Among the parameters defining the behaviour of concrete in ...
TTribocorrosion behavior of boronized Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 high entropy alloy
(Elsevier, 2021)
Boride layers were grown on the surface of a Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 high-entropy alloy (HEA) by boronizing at temperatures of 900, 950 and 1000 degrees C for 4 h using nanosized boronizing powders. ...