Ara
Toplam kayıt 10, listelenen: 1-10
Microstructural, wear and corrosion characteristics of boronized AISI 904L superaustenitic stainless steel
(Elsevier, 2021)
AISI 900 series stainless steels are considered as low-cost alternatives to nickel-based superalloys used for highly corrosive environments. However, in terms of mechanical properties, they have average strength and hardness ...
Simulated and experimental verification of the microwave dual-band metamaterial perfect absorber based on square patch with a 45(0) diagonal slot structure
(Taylor and Francis, 2021)
In this paper, we designed a dual band metamaterial perfect absorber (MPA) for Ku band applications. The overall ultrathin layer of proposed absorber consists of square patch with 450 diagonal slot structure within a copper ...
Characteristics, high temperature wear and oxidation behavior of boride layer grown on nimonic 80A Ni-based superalloy
(Elsevier, 2021)
Nickel-based superalloy Nimonic 80A was pack-borided in a solid medium at temperatures of 850 degrees C and 950 degrees C for 2 h and 4 h using silicon-free boriding powders. To investigate the effects of the boriding ...
TTribocorrosion behavior of boronized Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 high entropy alloy
(Elsevier, 2021)
Boride layers were grown on the surface of a Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 high-entropy alloy (HEA) by boronizing at temperatures of 900, 950 and 1000 degrees C for 4 h using nanosized boronizing powders. ...
Characteristics, high temperature wear and oxidation behavior of boride layer grown on nimonic 80A Ni-based superalloy
(Elsevier, 2021)
Nickel-based superalloy Nimonic 80A was pack-borided in a solid medium at temperatures of 850 degrees C and 950 degrees C for 2 h and 4 h using silicon-free boriding powders. To investigate the effects of the boriding ...
Effect of thermal degradation on the properties and wear behavior of Cr−V−C composite coatings grown on ductile iron
(Elsevier, 2021)
The thermal fatigue behavior of chromium vanadium carbide (Cr - V - C) coatings and the wear of the coatings after thermal fatigue cycling was studied. The Cr - V - C coatings were grown on the surface of a ductile iron ...
Radio-wave shielding behavior of steel structures
(Taylor and Francis, 2021)
The shielding of radio wave by steel-containing structures is desirable for electronics protection but undesirable for telecommunication signal reception. This work investigates the shielding behavior of steel structures ...
Utilization of a triple hexagonal split ring resonator (SRR) based metamaterial sensor for the improved detection of fuel adulteration
(Springer, 2021)
In this work, a triple hexagonal split ring resonator incorporated metamaterial sensor is proposed for the improved detection of fuel adulteration. The proposed metamaterial structure is made of three resonators, acting ...
Synthesis and characterization of nanoparticles reinforced epoxy based advanced radar absorbing composites
(Springer, 2021)
In this study, the structural and magnetic properties of NixCo1-xFe2O4 (0.0 <= x <= 1.0) and ZnO nanoparticles synthesized by the sol-gel method were investigated. The microwave property of the composite structures produced ...
Surrogate Based Design Optimization of Multi-Band Antenna
(Institute of Electrical and Electronics Engineers Inc., 2021)
In this work, design optimization process of a multi-band antenna via the use of Artificial Neural Network (ANN) based surrogate model and meta-heuristic optimizers is studied. For this mean firstly, by using Latin-Hyper ...