dc.contributor.author | Ceritbinmez, Ferhat | |
dc.contributor.author | Özkan, Vildan | |
dc.contributor.author | Saraçoğlu, Göksel | |
dc.contributor.author | Yapıcı, Ahmet | |
dc.date.accessioned | 2021-06-03T08:52:06Z | |
dc.date.available | 2021-06-03T08:52:06Z | |
dc.date.issued | 2021 | en_US |
dc.identifier.citation | Ceritbinmez, F., Özkan, V., Saracoglu, G., Yapici, A. (2021). MWCNTs doped GFRPs drilling: crosscheck among holes obtained by alternative manufacturing methods. International Journal of Advanced Manufacturing Technology
https://doi.org/10.1007/s00170-021-07181-5 | en_US |
dc.identifier.uri | https://doi.org/10.1007/s00170-021-07181-5 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12508/1721 | |
dc.description.abstract | In this study, the holes of glass fiber reinforced polymer (GFRP) and multi-walled carbon nanotubes (MWCNTs) doped GFRP composite materials were drilled using abrasive water jet (AWJ), CO2 laser cutting, orbital drilling, and punching methods; the effects of these methods on hole quality were determined. The hole entry and exit dimensions were obtained equal and in the desired size by orbital drilling; thus, kerf formation was prevented due to the lateral and face milling of the end mill. The surface hardness change was not observed in the hole circles obtained with the orbital drilling and punching methods. However, epoxy hardening was observed in the hole circles obtained by laser cutting due to the heat effect of laser beam. In AWJ method, matrix-fiber integrity was disrupted, and delamination was observed due to the effect of water pressure and kinetic energy; consequently an increase in material thickness was observed and surface hardness decreased. It was determined that MWCNTs additive increased the surface hardness of composites and maintained its hardness and durability in post-cutting measurements. Splintering and burring were not seen in any method, but fiber carbonization was observed in the inner parts of the hole due to thermal effects in laser cutting. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | Springer | en_US |
dc.relation.isversionof | 10.1007/s00170-021-07181-5 | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Machinability | en_US |
dc.subject | Punching | en_US |
dc.subject | Orbital drilling | en_US |
dc.subject | Kerf | en_US |
dc.subject | AWJ | en_US |
dc.subject | Laser cut | en_US |
dc.subject.classification | Automation & Control Systems | |
dc.subject.classification | Engineering | |
dc.subject.classification | Manufacturing | |
dc.subject.classification | Carbon Fiber Reinforced Plastics | |
dc.subject.classification | Cutting Force | |
dc.subject.classification | Tool Wear | |
dc.subject.other | Mechanical-properties | |
dc.subject.other | CFRP composites | |
dc.subject.other | Punched holes | |
dc.subject.other | Laser | |
dc.subject.other | Profile | |
dc.subject.other | Carbon dioxide lasers | |
dc.subject.other | Carbonization | |
dc.subject.other | Fiber reinforced plastics | |
dc.subject.other | Hardness | |
dc.subject.other | Infill drilling | |
dc.subject.other | Kinetic energy | |
dc.subject.other | Kinetics | |
dc.subject.other | Laser beam cutting | |
dc.subject.other | Laser beams | |
dc.subject.other | Milling (machining) | |
dc.subject.other | Multiwalled carbon nanotubes (MWCN) | |
dc.subject.other | Abrasive water jet | |
dc.subject.other | CO2 laser cutting | |
dc.subject.other | Cutting measurements | |
dc.subject.other | Fiber integrity | |
dc.subject.other | Glass fiber reinforced polymer | |
dc.subject.other | Manufacturing methods | |
dc.subject.other | Material thickness | |
dc.subject.other | Surface hardness | |
dc.subject.other | Boreholes | |
dc.title | MWCNTs doped GFRPs drilling: crosscheck among holes obtained by alternative manufacturing methods | en_US |
dc.type | article | en_US |
dc.relation.journal | International Journal of Advanced Manufacturing Technology | en_US |
dc.contributor.department | Mühendislik ve Doğa Bilimleri Fakültesi -- Makina Mühendisliği Bölümü | en_US |
dc.contributor.department | Mühendislik ve Doğa Bilimleri Fakültesi -- Petrol ve Doğalgaz Mühendisliği Bölümü | |
dc.contributor.department | Havacılık ve Uzay Bilimleri Fakültesi -- Uçak Bakım ve Onarım Bölümü | |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.contributor.isteauthor | Ceritbinmez, Ferhat | |
dc.contributor.isteauthor | Özkan, Vildan | |
dc.contributor.isteauthor | Saraçoğlu, Göksel | |
dc.contributor.isteauthor | Yapıcı, Ahmet | |
dc.relation.index | Web of Science - Scopus | en_US |
dc.relation.index | Web of Science Core Collection - Science Citation Index Expanded | |