Ara
Toplam kayıt 7, listelenen: 1-7
Comparative experimental study on the modification of microstructural and mechanical properties of friction stir welded and gas metal arc welded EN AW-6061 O aluminum alloys by post-weld heat treatment
(Wiley-VCH Verlag, 2018)
In this paper, the effects of post-weld heat treatment on modification of microstructures and mechanical properties of friction stir welded and gas metal arc welded AA6061-O plates were compared with each other. Gas metal ...
Investigation of cotton fabric composites as a natural radar-absorbing material
(Emerald Group Publishing Ltd., 2020)
Purpose The purpose of this paper is to investigate cotton fabric behavior that is exposed to radar waves between selected operation frequencies as an alternative radar-absorbing material (RAM) response. Cotton fabric ...
The Theoretical Value for the Tip Radius of Cracks and Notches
(Kauno Technologijos Universitetas, 2022)
In this paper, an additional equation that can be used in conjunction with the Stress Intensity Factor is produced, enabling the determination of all critical fracture stresses, including tensile strength, from only one ...
Characterizations of Microstructure and Properties of Dissimilar AISI 316L/9Ni Low-Alloy Cryogenic Steel Joints Fabricated by Gas Tungsten Arc Welding
(Springer, 2022)
The demand for dissimilar joining of steel grades, namely austenitic stainless steels to low-alloy steels, may increase in near future owing to the fact that the storing of LNG is currently becoming a necessity, particularly ...
Multi-pass butt welding of thick AISI 316L plates by gas tungsten arc welding: Microstructural and mechanical characterization
(Elsevier, 2022)
Austenitic stainless steels exhibit excellent properties such as outstanding formability even at cryogenic temperatures, high mechanical properties and good corrosion performance. This makes them attractive for use in ...
A new hybrid meta-heuristic optimization method for predicting UTS for FSW of Al/Cu dissimilar materials
(SAGE Publications, 2023)
Joining of aluminum (Al) and copper (Cu) materials used in aerospace, automotive, chemistry, nuclear, electrical-electronic and energy sector with traditional fusion welding methods has some negative consequences. One of ...
Microstructure and mechanical response of novel Co-free FeNiMnCrAlTi high-entropy alloys
(Elsevier, 2023)
The present study investigates the microstructure and mechanical properties of the Co-free FeNiMnCrAlTi high-entropy alloy (HEA) after casting, homogenizing heat treatment, and hot rolling. The results show that the dendrite ...