Basit öğe kaydını göster

dc.contributor.authorBaltacıoğlu, Mustafa
dc.contributor.authorBaşar, Mustafa Tunahan
dc.contributor.authorKaraaslan, Muharrem
dc.contributor.authorAlkurt, Fatih Özkan
dc.contributor.authorArıpek, Samet Alparslan
dc.date.accessioned2022-01-12T08:13:22Z
dc.date.available2022-01-12T08:13:22Z
dc.date.issued2021en_US
dc.identifier.citationBaltacıoğlu, M., Arıpek, S., A., Başar, M., T., Karaaslan, M., Alkurt, F., Ö. (2021). Electromagnetic Analysis of Organic Waste and Blust Furnace Slag Mixtures. European Mechanical Science, 5(3), 148 - 152. https://doi.org/10.26701/ems.860949en_US
dc.identifier.urihttps://doi.org/10.26701/ems.860949
dc.identifier.urihttps://hdl.handle.net/20.500.12508/2108
dc.identifier.urihttps://dergipark.org.tr/tr/pub/ems/issue/62799/860949
dc.description.abstractIn this experimental study, a composite structure was obtained by combining apple pulp wastes with slag wastes. Electromagnetic field characteristics of test samples have been determined. In the scope of the study, dry apple pulp and slag wastes were transformed into square plate form using a specially designed mold and a pressing bench with a capacity of 50 tons. The measurements were carried out in the 3-18 GHz frequency band in the microwave laboratory. In the measurements, five different measurement results were obtained: air, high quality commercial absorber, pure apple pulp, 50 g apple pulp with slag and 150 g of slag added apple pulp. The results of the measured samples were compared and interpreted with the results of air and high quality commercial absorber material. As a result, the samples formed by pure apple pulp, 50 g slag-added sample and 150 g slagadded sample in terms of electromagnetic permeability similar results were obtained. The slag-added sample of 50 g performed better absorption in certain frequency regions than the slag-added sample of 150 g. In addition, it produces close transmission values in three samples in the 8-12 GHz X-band frequency range. In addition, considering the absorption values of the slag-added structures, it was determined that they absorb signals 90% on average in the frequency regions of 8 GHz and aboveen_US
dc.language.isoengen_US
dc.publisherEuropean Mechanical Scienceen_US
dc.relation.isversionof10.26701/ems.860949en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectOrganic wasteen_US
dc.subjectBlast furnace slagen_US
dc.subjectAbsorberen_US
dc.subjectElectromagnetic conductivityen_US
dc.titleElectromagnetic Analysis of Organic Waste and Blust Furnace Slag Mixturesen_US
dc.typearticleen_US
dc.relation.journalEuropean Mechanical Scienceen_US
dc.contributor.departmentMühendislik ve Doğa Bilimleri Fakültesi -- Mekatronik Mühendisliği Bölümüen_US
dc.contributor.departmentMühendislik ve Doğa Bilimleri Fakültesi -- Makine Mühendisliği Bölümü
dc.contributor.departmentMühendislik ve Doğa Bilimleri Fakültesi -- Elektrik Elektronik Mühendisliği Bölümü
dc.identifier.volume5en_US
dc.identifier.issue3en_US
dc.identifier.startpage148en_US
dc.identifier.endpage152en_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.contributor.isteauthorBaltacıoğlu, Mustafa
dc.contributor.isteauthorArıpek, Samet Alparslan
dc.contributor.isteauthorBaşar, Mustafa Tunahan
dc.contributor.isteauthorKaraaslan, Muharrem
dc.contributor.isteauthorAlkurt, Fatih Özkan
dc.relation.indexTR-Dizinen_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster