dc.contributor.author | Güvenç, Mehmet Ali | |
dc.contributor.author | Bilgiç, Hasan Hüseyin | |
dc.contributor.author | Mıstıkoğlu, Selçuk | |
dc.date.accessioned | 2024-01-10T06:14:03Z | |
dc.date.available | 2024-01-10T06:14:03Z | |
dc.date.issued | 2023 | en_US |
dc.identifier.citation | Guvenc, M.A., Bilgic, H.H., Mistikoglu, S. (2023). Identification Of Chatter Vibrations And Active Vibration Control By Using The Sliding Mode Controller On Dry Turning Of Titanium Alloy (TI6AL4V). Facta Universitatis, Series: Mechanical Engineering, 21 (2), pp. 307-322.
https://doi.org/10.22190/FUME210728067G | en_US |
dc.identifier.issn | 0354-2025 | |
dc.identifier.issn | 2335-0164 | |
dc.identifier.uri | https://doi.org/10.22190/FUME210728067G | |
dc.identifier.uri | https://hdl.handle.net/20.500.12508/2952 | |
dc.description.abstract | In recent years, with the development of sensor technologies, communication platforms, cyber-physical systems, storage technologies, internet applications and controller infrastructures, the way has been opened to produce competitive products with high quality and low cost. In turning, which is one of the important processes of machining, chatter vibrations are among the biggest problems affecting product quality, productivity and cost. There are many techniques proposed to reduce chatter vibrations for which the exact cause cannot be determined. In this study, an active vibration control based on the Sliding Mode Control (SMC) has been implemented in order to reduce and eliminate chatter vibration, which is undesirable for the turning process. In this context, three-axis acceleration data were collected from the cutting tool during the turning of Ti6Al4V. Finite Impulse Response (FIR) filtering, Fast Fourier Transform (FFT) analysis and integral process were carried out in order to use the raw acceleration data collected over the system in control. The system is modeled mathematically and an active control block diagram is created. It is observed that chattering decreased significantly after the application of active vibration control. The surface quality formed by the amplitude of the graph obtained after active control has been compared and verified with the data obtained from the actual manufacturing result. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | University of Nis | en_US |
dc.relation.isversionof | 10.22190/FUME210728067G | en_US |
dc.rights | info:eu-repo/semantics/openAccess | en_US |
dc.subject | Active vibration control | en_US |
dc.subject | Chatter | en_US |
dc.subject | Sliding mode controller | en_US |
dc.subject | Ti6Al4V | en_US |
dc.subject | Turning | en_US |
dc.subject.classification | Engineering & Materials Science
- Manufacturing
- Tool Wear | |
dc.subject.classification | Chatter | |
dc.subject.classification | Machining | |
dc.subject.classification | Cutting Force | |
dc.subject.other | Mechanical-properties | |
dc.subject.other | Shell element | |
dc.subject.other | Suppression | |
dc.subject.other | Sensors | |
dc.subject.other | Acceleration | |
dc.subject.other | Aluminum alloys | |
dc.subject.other | Cutting tools | |
dc.subject.other | Digital storage | |
dc.subject.other | Embedded systems | |
dc.subject.other | Fast fourier transforms | |
dc.subject.other | FIR filters | |
dc.subject.other | Impulse response | |
dc.subject.other | Quality control | |
dc.subject.other | Ternary alloys | |
dc.subject.other | Turning | |
dc.subject.other | Acceleration data | |
dc.subject.other | Active control | |
dc.subject.other | Active vibration controls | |
dc.subject.other | Chatter | |
dc.subject.other | Chatter vibrations | |
dc.subject.other | Dry turning | |
dc.subject.other | Sensor technologies | |
dc.subject.other | Sliding mode controller | |
dc.subject.other | Titanium alloy Ti6Al4V | |
dc.subject.other | Vibration vibrations | |
dc.subject.other | Titanium alloys | |
dc.title | Identification Of Chatter Vibrations And Active Vibration Control By Using The Sliding Mode Controller On Dry Turning Of Titanium Alloy (TI6AL4V) | en_US |
dc.type | article | en_US |
dc.relation.journal | Facta Universitatis, Series: Mechanical Engineering | en_US |
dc.contributor.department | Mühendislik ve Doğa Bilimleri Fakültesi -- Makina Mühendisliği Bölümü | en_US |
dc.identifier.volume | 21 | en_US |
dc.identifier.issue | 2 | en_US |
dc.identifier.startpage | 307 | en_US |
dc.identifier.endpage | 322 | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.contributor.isteauthor | Güvenç, Mehmet Ali | |
dc.contributor.isteauthor | Mıstıkoğlu, Selçuk | |
dc.relation.index | Web of Science - Scopus | en_US |
dc.relation.index | Web of Science Core Collection - Science Citation Index Expanded | |