Basit öğe kaydını göster

dc.contributor.authorBalçıkanlı Bankir, Müzeyyen
dc.date.accessioned2024-01-15T10:19:20Z
dc.date.available2024-01-15T10:19:20Z
dc.date.issued2022en_US
dc.identifier.citationBalçıkanlı Bankir, M. (2022). Yeşil Mutabakatı Destekleyen Mineral Katkılı Çimento Esaslı Kompozitlerin Asit-Sülfat Direnci ve Karbonatlaşma Derinliği. Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online), 5(2), 943 - 957. 10.47495/okufbed.1012497en_US
dc.identifier.urihttps://doi.org/10.47495/okufbed.1012497
dc.identifier.urihttps://dergipark.org.tr/tr/pub/okufbed/issue/71216/1012497
dc.identifier.urihttps://hdl.handle.net/20.500.12508/3001
dc.description.abstractÇalışma kapsamında sürdürülebilir ve yeşil mutabakatı destekleyen çimento esaslı kompozitlerin mekanik ve durabilite performanslarını değerlendirmek için Granüle Yüksek Fırın Cürufu (GYFC), Uçucu Kül (UK) ve Silis Dumanı (SD)’nın tekli, ikili ve üçlü kompozisyonlarının çimento ile ağırlıkça %15, %30 ve %45 oranında ikame edilmesi ile sekiz farklı beton üretilmiştir. Numunelerin 28 ve 90 günlük dört noktadan eğilme dayanımı ve basınç dayanımının yanı sıra 30 gün boyunca %5 konsantrasyonda hazırlanan sülfürik asit ve sodyum sülfat içeren ortamlara maruz kalan betonların performans değerlendirilmesi ağırlık ve dayanım değişimleri dikkate alınarak yapılmıştır. Çimento miktarının %30 azaltılması ile üretilen kompozit numuneler kontrol numunesine göre daha üstün mekanik ve durabilite özelliği sergilemiştir. Laboratuvar ortamında bekletilen numunelerin 60 ve 120 günlük karbonatlaşma derinlikleri (KD) de ölçülmüş ve KD’yi sınırlayan en ideal kompozisyon %15 GYFC+ %15 UK’dir.en_US
dc.description.abstractWithin the scope of the study, in order to evaluate the mechanical and durability performances of cement-based composites that support sustainable production and green deal, single, double and triple compositions of Granulated Blast Furnace Slag (GYFC), Fly Ash (UK) and Silica Fume (SD) were replaced with cement 15%, 30% and 45% by weight and so eight different concretes were produced. In addition to the four point flexural and compressive strength of the samples at 28 and 90 days, the concretes were exposed to sulfuric acid and sodium sulfate solutions prepared at 5% concentration for 30 days. Performance evaluation was made by considering weight and strength changes. Concrete samples produced by reducing the amount of cement by 30% showed superior mechanical and durability properties compared to the control sample. Carbonation depths (KD) of 60 and 120 days samples, kept in the laboratory, were measured and the ideal composition limiting the KD was 15% GYFC + 15% UK.en_US
dc.language.isoturen_US
dc.publisherOsmaniye Korkut Ata Üniversitesien_US
dc.relation.isversionof10.47495/okufbed.1012497en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectSürdürülebilir üretimen_US
dc.subjectYeşil mutabakaten_US
dc.subjectMineral katkıen_US
dc.subjectAsit ve sülfat direncien_US
dc.subjectKarbonatlaşmaen_US
dc.subjectSustainable productionen_US
dc.subjectGreen dealen_US
dc.subjectMineral additiveen_US
dc.subjectAcid and sulfate resistanceen_US
dc.subjectCarbonationen_US
dc.titleYeşil Mutabakatı Destekleyen Mineral Katkılı Çimento Esaslı Kompozitlerin Asit-Sülfat Direnci ve Karbonatlaşma Derinliğien_US
dc.title.alternativeAggressive Environment and Carbonation Resistance of Sustainable Cement-Based Composites Supporting the Green Dealen_US
dc.typearticleen_US
dc.relation.journalOsmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisien_US
dc.contributor.departmentMühendislik ve Doğa Bilimleri Fakültesi -- İnşaat Mühendisliği Bölümüen_US
dc.identifier.volume5en_US
dc.identifier.issue2en_US
dc.identifier.startpage943en_US
dc.identifier.endpage957en_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.contributor.isteauthorBalçıkanlı Bankir, Müzeyyen
dc.relation.indexTR-Dizinen_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster