Ara
Toplam kayıt 25, listelenen: 1-10
Grease oil humidity sensor by using metamaterial
(Taylor and Francis, 2020)
Interaction between water and lubrication grease oil is not desirable, but it is not inevitable. The operational life of the machine component is influenced by humid grease oil. Metameterial-based transmission line sensor ...
Examining the receiver heat loss, parametric optimization and exergy analysis of a solar power tower (SPT) system
(Taylor & Francis, 2020)
Thanks to the studies on the material properties of the future solar tower systems and together with the developments in the material science, it has been observed that higher operating temperatures can be possible for SPT ...
Performance optimization of hybrid fiber concrete according to mechanical properties
(Elsevier, 2020)
In this research, interactional effects of four different fiber types, (steel, glass, synthetic and polypropylene) fly ash replacement ratio with cement, electrical arc furnace slag replacement ratio with natural aggregate ...
Effect of n-CaCO3 on fresh, hardened properties and acid resistance of granulated blast furnace slag added mortar
(Elsevier, 2020)
Nano size CaCO3 (n-CaCO3) particles were used as an additive into the Ground Granulated Blast Furnace Slag (GGBS) added mortar to investigate their effects on fresh, hardened properties and acid resistance. Setting time, ...
Determination of frying sunflower oil usage time for local potato samples by using microwave transmission line based sensors
(Elsevier, 2020)
Amount of oil usage time can be determined by microwave measurements instead of using complex laboratory equipments to measure oil parameters such as viscosity, base number, refractive index, acid numbers, density, water ...
Properties and Corrosion Behavior of Chromium and Vanadium Carbide Composite Coatings Produced on Ductile Cast Iron by Thermoreactive Diffusion Technique
(ASME, 2020)
Ductile iron (DI) owes many of its attractive mechanical properties to the graphite nodules in its structure. However, since galvanic coupling can occur between the graphite nodules and the matrix in aggressive environments, ...
Properties and Corrosion Resistance of Borided AISI H11 Tool Steel
(Asme, 2020)
In this study, the effect of different boriding parameters on some mechanical properties and corrosion resistance of AISI H11 steel, which is extensively used in hot and cold processing applications, was investigated. The ...
Improvement of energy harvesting capability in grid-connected photovoltaic micro-inverters
(Taylor & Francis, 2020)
In this paper, a multi-stage micro-inverter system depending on a dual neutral point clamped (D-NPC) inverter is developed for low power photovoltaic (PV) applications. The primary objectives of this study are determined ...
Zero-sequence current injection based power flow control strategy for grid inverter interfaced renewable energy systems
(Taylor & Francis, 2020)
This paper deals with an energy management issue for the grid-connected
renewable energy sources connected with unbalanced loads. In the gridconnected energy systems, conventional energy management methods are
used to ...
Oil and gas exploration in Seferihisar Uplift (Western Turkey) containing an operable-size gold deposit: Geochemical evidence for the presence of a working petroleum system
(Springer Heidelberg, 2020)
In recent studies, the links between hydrocarbon accumulations and gold mineralizations have been examined. According to the results obtained from these studies, it has been reported that gold and hydrocarbons are carried ...