Search
Now showing items 1-10 of 23
Microstructural alteration of alkali activated slag mortars depend on exposed high temperature level
(Elsevier, 2016)
This article reports a study on the microstructural and mechanical properties of the Alkali Activated Slag mortars (MS) upon exposing to the elevated temperatures up to 800 degrees C. Slag cement is activated by sodium ...
Utilization and efficiency of ground granulated blast furnace slag on concrete properties - A review
(Elsevier, 2016)
Ground granulated blast furnace slag (GGBFS) is a byproduct from the blast-furnaces of iron and it is a very beneficial in the mortar and concrete production. The present paper reviews the literature related to the utilization ...
Performance optimization of hybrid fiber concrete according to mechanical properties
(Elsevier, 2020)
In this research, interactional effects of four different fiber types, (steel, glass, synthetic and polypropylene) fly ash replacement ratio with cement, electrical arc furnace slag replacement ratio with natural aggregate ...
Utilization of boron waste borogypsum in mortar
(Elsevier, 2019)
In this study, mortars containing borogypsum (MCB) were investigated to understand the effect of borogypsum on mortars and if borogypsum could be used as a mineral admixture in the mortars. Borogypsum were replaced with ...
Improving the aging resistance of bitumen by addition of polymer based diethylene glycol
(Elsevier, 2018)
This study deals with improving the short-term aging resistance of bitumen with a new material, a diethylene glycol based polyboron compound (DEGPB). The compound was synthesized chemically and used 50/70 penetration grade ...
Effect of n-CaCO3 on fresh, hardened properties and acid resistance of granulated blast furnace slag added mortar
(Elsevier, 2020)
Nano size CaCO3 (n-CaCO3) particles were used as an additive into the Ground Granulated Blast Furnace Slag (GGBS) added mortar to investigate their effects on fresh, hardened properties and acid resistance. Setting time, ...
Mechanical and electromagnetic performance of cement based composites containing different replacement levels of ground granulated blast furnace slag, fly ash, silica fume and rice husk ash
(Elsevier, 2020)
In this study, cement additives were replaced with cement in mortar mixtures by mass. Mortar specimens were prepared with different additives and dosages which were mechanically and electromagnetically tested. According ...
Experimental work on mechanical, electromagnetic and microwave shielding effectiveness properties of mortar containing electric arc furnace slag
(Elsevier, 2018)
It is well known that one of the widely used structural materials is ordinary cement mortar. Whereas the mechanical properties are sufficient as structural materials, its shielding effectiveness and prevention properties ...
Investigation of the mechanic, electromagnetic characteristics and shielding effectiveness of concrete with boron ores and boron containing wastes
(Elsevier, 2020)
In this study, mechanical properties electromagnetic (EM), and shielding effectiveness of concrete samples containing boron product and wastes was investigated in details. In order to increase shielding effectiveness of ...
Identifying the bond and abrasion behavior of alkali activated concretes by central composite design method
(Elsevier, 2017)
In this paper, bond strength and abrasion resistance of alkali activated concretes (AAC) were examined experimentally by using the central composite design (CCD) method. AAC were designed and produced considering the sodium ...
