Ara
Toplam kayıt 18, listelenen: 1-10
Sodyum sülfat ile aktifleştirilen uçucu kül katkılı harçların özellikleri
(Niğde Üniversitesi Mühendislik Bilimleri Dergisi, 2016)
Portland çimentosunun icadından önce mineral katkılar sönmüş kireçle karıştırılarak harç imalinde bağlayıcı olarak kullanılmıştır. Günümüzde de mineral katkılar, ekonomik olduklarından ve özellikle taze ve sertleşmiş beton ...
Microstructural alteration of alkali activated slag mortars depend on exposed high temperature level
(Elsevier, 2016)
This article reports a study on the microstructural and mechanical properties of the Alkali Activated Slag mortars (MS) upon exposing to the elevated temperatures up to 800 degrees C. Slag cement is activated by sodium ...
Utilization and efficiency of ground granulated blast furnace slag on concrete properties - A review
(Elsevier, 2016)
Ground granulated blast furnace slag (GGBFS) is a byproduct from the blast-furnaces of iron and it is a very beneficial in the mortar and concrete production. The present paper reviews the literature related to the utilization ...
Utilization of boron waste borogypsum in mortar
(Elsevier, 2019)
In this study, mortars containing borogypsum (MCB) were investigated to understand the effect of borogypsum on mortars and if borogypsum could be used as a mineral admixture in the mortars. Borogypsum were replaced with ...
Effect of n-CaCO3 on fresh, hardened properties and acid resistance of granulated blast furnace slag added mortar
(Elsevier, 2020)
Nano size CaCO3 (n-CaCO3) particles were used as an additive into the Ground Granulated Blast Furnace Slag (GGBS) added mortar to investigate their effects on fresh, hardened properties and acid resistance. Setting time, ...
Mechanical and electromagnetic performance of cement based composites containing different replacement levels of ground granulated blast furnace slag, fly ash, silica fume and rice husk ash
(Elsevier, 2020)
In this study, cement additives were replaced with cement in mortar mixtures by mass. Mortar specimens were prepared with different additives and dosages which were mechanically and electromagnetically tested. According ...
Experimental work on mechanical, electromagnetic and microwave shielding effectiveness properties of mortar containing electric arc furnace slag
(Elsevier, 2018)
It is well known that one of the widely used structural materials is ordinary cement mortar. Whereas the mechanical properties are sufficient as structural materials, its shielding effectiveness and prevention properties ...
Production of new electromagnetic wave shielder mortar using waste mill scales
(Elsevier, 2020)
Electromagnetic (EM) wave shielder mortar can be produced by mixing cement, natural limestone, tap water with mill scale (mill scale-I and mill scale-II) which is one of the biggest disposal area problems of the iron-steel ...
Synergetic effect of waste tire rubber and mil scale on electromagnetic wave attenuation properties of new generation mortar
(Elsevier, 2020)
In this study, the behaviors of cement based building materials containing a certain amount of crumb rubbers (CR) and mill scales as additives were explored. For this purpose, five different CR content by volume of the ...
Compressive strength prediction models for cementitious composites with fly ash using machine learning techniques
(Elsevier, 2021)
In this study, it was proposed a novel prediction model to predict compressive strength of mortar samples having different properties. For this purpose, 8 different fly ashes were used in mortar mixture as a replacement ...