Ara
Toplam kayıt 14, listelenen: 1-10
Utilization of boron waste borogypsum in mortar
(Elsevier, 2019)
In this study, mortars containing borogypsum (MCB) were investigated to understand the effect of borogypsum on mortars and if borogypsum could be used as a mineral admixture in the mortars. Borogypsum were replaced with ...
Effect of n-CaCO3 on fresh, hardened properties and acid resistance of granulated blast furnace slag added mortar
(Elsevier, 2020)
Nano size CaCO3 (n-CaCO3) particles were used as an additive into the Ground Granulated Blast Furnace Slag (GGBS) added mortar to investigate their effects on fresh, hardened properties and acid resistance. Setting time, ...
Mechanical and electromagnetic performance of cement based composites containing different replacement levels of ground granulated blast furnace slag, fly ash, silica fume and rice husk ash
(Elsevier, 2020)
In this study, cement additives were replaced with cement in mortar mixtures by mass. Mortar specimens were prepared with different additives and dosages which were mechanically and electromagnetically tested. According ...
Experimental work on mechanical, electromagnetic and microwave shielding effectiveness properties of mortar containing electric arc furnace slag
(Elsevier, 2018)
It is well known that one of the widely used structural materials is ordinary cement mortar. Whereas the mechanical properties are sufficient as structural materials, its shielding effectiveness and prevention properties ...
Production of new electromagnetic wave shielder mortar using waste mill scales
(Elsevier, 2020)
Electromagnetic (EM) wave shielder mortar can be produced by mixing cement, natural limestone, tap water with mill scale (mill scale-I and mill scale-II) which is one of the biggest disposal area problems of the iron-steel ...
Synergetic effect of waste tire rubber and mil scale on electromagnetic wave attenuation properties of new generation mortar
(Elsevier, 2020)
In this study, the behaviors of cement based building materials containing a certain amount of crumb rubbers (CR) and mill scales as additives were explored. For this purpose, five different CR content by volume of the ...
Compressive strength prediction models for cementitious composites with fly ash using machine learning techniques
(Elsevier, 2021)
In this study, it was proposed a novel prediction model to predict compressive strength of mortar samples having different properties. For this purpose, 8 different fly ashes were used in mortar mixture as a replacement ...
DC electric polarization of cured cement paste being unexpectedly hindered by free water
(Wiley, 2021)
Electric polarization is basic to the dielectric behavior, which is pertinent to the science and applications of cement-based materials. This work reports the dynamics of the DC-current-induced electric polarization/depolarization ...
Capacitance-based stress self-sensing effectiveness of a model asphalt without functional component
(Elsevier, 2021)
Capacitance-based self-sensing is shown for the first time on a pitch-based material, which serves as model asphalt. No functional component is involved. Compressive stress (5–1720 Pa) is sensed. The capacitance increases ...
Self-sensing reinforced concrete for damage assessment and real time strength development in smart structures
(Taylor and Francis, 2022)
In this study, a self-sensing smart structure was developed with a novel approach. Electromagnetic wave based self-sensing structure designed by sending waves to the reinforced concrete structure through the reinforcement ...