Ara
Toplam kayıt 15, listelenen: 1-10
A comparative study on daily evapotranspiration estimation by using various artificial intelligence techniques and traditional regression calculations
(American Institute of Mathematical Sciences, 2023)
Evapotranspiration is an important parameter to be considered in hydrology. In the design of water structures, accurate estimation of the amount of evapotranspiration allows for safer designs. Thus, maximum efficiency can ...
Laboratory and numerical investigation of the 2-array submerged vanes in meandering open channel
(American Institute of Mathematical Sciences, 2023)
In the case of flooding in rivers, river regulation structures are important since scours occur on the outer meander due to high flow velocities. In this study, 2-array submerged vane structures were investigated which is ...
Pull-out capacity prediction of sustainable cementitious composites with artificial intelligence and statistical methods
(Wiley, 2023)
Concrete is used with reinforcement in structures so adherence gains importance especially in fire scenarios. To contribute production of sustainable concrete, by-products like granulated blast furnace slag, fly ash, and ...
High-temperature effect on mechanical properties of fiber reinforced concretes including waste tire rubber
(Wiley, 2023)
In this paper, concretes including three different fiber types (carbon steel fiber [CSF], forta ferro fiber [FFF], and polypropylene fiber [PPF]) with different percentages by volume (0.5%, 1%, and 1.5%) and crumb rubber ...
Experimental and Numerical Study on Flow Control Using 3-Array Submerged Vane in Laboratory Channel Bend
(MDPI, 2023)
Regulation structures such as submerged vane are needed to reduce and eliminate environmental damage due to increased flooding in rivers. In particular, scours on the outer bank due to increased flow velocities cause the ...
Development of a Three-Dimensional CFD Model and OpenCV Code by Comparing with Experimental Data for Spillway Model Studies
(MDPI, 2023)
This article presents a three-dimensional CFD model and OpenCV code by comparing the flow over the spillway with the experimental data for use in spillway studies. A 1/200-scale experimental model of a real dam spillway ...
Investigation of the effect of curing and high temperature on the strength of copolymer added geopolymer mortars
(Taylor and Francis, 2023)
Cracks that occur in geopolymer mortars under the influence of high temperature cause a decrease in strength. In this study, ethylene and methyl-acrylate copolymer-based phase change material added (5%, 10% and 15% by mass) ...
A comparative experimental study of geocell and geogrid-reinforced highway base layers under repeated loads
(Taylor and Francis, 2023)
This paper presents experimental results of laboratory model tests of geosynthetic reinforced highway base layers subjected to repeated loads. The potential benefit of geocell and geogrid, when used in the base layer as a ...
Capacitance-based compression self-sensing effectiveness of cement paste with curing time
(ICE Publishing, 2023)
Capacitance-based self-sensing properties of cement pastes at different curing times were studied in this work. Cement paste samples that did not require any functional materials were tested at 7, 14 and 28 days. Continuous ...
Coupling of stabilized total Lagrangian and weakly compressible SPH models for challenging fluid–elastic structure interaction problems
(Springer, 2023)
A numerical model based on the total Lagrangian (TL) and weakly compressible (WC) smoothed particle hydrodynamics (SPH) coupling is developed for complex hydroelastic FSI problems. In this coupling scheme, the fluid phase ...