Ara
Toplam kayıt 7, listelenen: 1-7
Utilization of boron waste borogypsum in mortar
(Elsevier, 2019)
In this study, mortars containing borogypsum (MCB) were investigated to understand the effect of borogypsum on mortars and if borogypsum could be used as a mineral admixture in the mortars. Borogypsum were replaced with ...
Effect of n-CaCO3 on fresh, hardened properties and acid resistance of granulated blast furnace slag added mortar
(Elsevier, 2020)
Nano size CaCO3 (n-CaCO3) particles were used as an additive into the Ground Granulated Blast Furnace Slag (GGBS) added mortar to investigate their effects on fresh, hardened properties and acid resistance. Setting time, ...
Mechanical and electromagnetic performance of cement based composites containing different replacement levels of ground granulated blast furnace slag, fly ash, silica fume and rice husk ash
(Elsevier, 2020)
In this study, cement additives were replaced with cement in mortar mixtures by mass. Mortar specimens were prepared with different additives and dosages which were mechanically and electromagnetically tested. According ...
Production of new electromagnetic wave shielder mortar using waste mill scales
(Elsevier, 2020)
Electromagnetic (EM) wave shielder mortar can be produced by mixing cement, natural limestone, tap water with mill scale (mill scale-I and mill scale-II) which is one of the biggest disposal area problems of the iron-steel ...
Synergetic effect of waste tire rubber and mil scale on electromagnetic wave attenuation properties of new generation mortar
(Elsevier, 2020)
In this study, the behaviors of cement based building materials containing a certain amount of crumb rubbers (CR) and mill scales as additives were explored. For this purpose, five different CR content by volume of the ...
Capacitance-based stress self-sensing in asphalt without electrically conductive constituents, with relevance to smart pavements
(Elsevier, 2022)
The capacitance-based stress self-sensing in asphalt without device or functional constituent incorporation is reported for the first time, with relevance to smart pavements. Stress sensing enables weighing. Without the ...
Investigation of the effect of curing and high temperature on the strength of copolymer added geopolymer mortars
(Taylor and Francis, 2023)
Cracks that occur in geopolymer mortars under the influence of high temperature cause a decrease in strength. In this study, ethylene and methyl-acrylate copolymer-based phase change material added (5%, 10% and 15% by mass) ...