Ara
Toplam kayıt 4, listelenen: 1-4
Effect of n-CaCO3 on fresh, hardened properties and acid resistance of granulated blast furnace slag added mortar
(Elsevier, 2020)
Nano size CaCO3 (n-CaCO3) particles were used as an additive into the Ground Granulated Blast Furnace Slag (GGBS) added mortar to investigate their effects on fresh, hardened properties and acid resistance. Setting time, ...
Mechanical and electromagnetic performance of cement based composites containing different replacement levels of ground granulated blast furnace slag, fly ash, silica fume and rice husk ash
(Elsevier, 2020)
In this study, cement additives were replaced with cement in mortar mixtures by mass. Mortar specimens were prepared with different additives and dosages which were mechanically and electromagnetically tested. According ...
Investigation of the Effect of Alkali Curing on the Strength Properties of GBFS-Added Composites
(American Society of Civil Engineers (ASCE), 2022)
Large amounts of waste products have been and most probably will continue to be produced with urbanization, industrialization, and technological developments. The study presented herein is devoted to using blast furnace ...
Investigation of the effect of curing and high temperature on the strength of copolymer added geopolymer mortars
(Taylor and Francis, 2023)
Cracks that occur in geopolymer mortars under the influence of high temperature cause a decrease in strength. In this study, ethylene and methyl-acrylate copolymer-based phase change material added (5%, 10% and 15% by mass) ...