Ara
Toplam kayıt 10, listelenen: 1-10
Performance optimization of hybrid fiber concrete according to mechanical properties
(Elsevier, 2020)
In this research, interactional effects of four different fiber types, (steel, glass, synthetic and polypropylene) fly ash replacement ratio with cement, electrical arc furnace slag replacement ratio with natural aggregate ...
Utilization of boron waste borogypsum in mortar
(Elsevier, 2019)
In this study, mortars containing borogypsum (MCB) were investigated to understand the effect of borogypsum on mortars and if borogypsum could be used as a mineral admixture in the mortars. Borogypsum were replaced with ...
Effect of n-CaCO3 on fresh, hardened properties and acid resistance of granulated blast furnace slag added mortar
(Elsevier, 2020)
Nano size CaCO3 (n-CaCO3) particles were used as an additive into the Ground Granulated Blast Furnace Slag (GGBS) added mortar to investigate their effects on fresh, hardened properties and acid resistance. Setting time, ...
Alkali activation of electric arc furnace slag: Mechanical properties and micro analyzes
(Elsevier, 2019)
Research on sustainable concrete has drawn scientist's attentions on industrial by-products and wastes. Thus, consumption of raw materials would be diminished. In this study alkali activation of electric arc furnace slag ...
Investigation of mechanical and microstructural performance of alkali activated electrical arc furnace slag mortars
(International Advanced Researches and Engineering Journal, 2019)
The production of Portland cement, resulting in the release of CO2 gas, excessive energy and natural resource consumption, has led to search for alternative materials with similar physical and mechanical properties to the ...
High-temperature effect on mechanical properties of fiber reinforced concretes including waste tire rubber
(Wiley, 2022)
In this paper, concretes including three different fiber types (carbon steel fiber [CSF], forta ferro fiber [FFF], and polypropylene fiber [PPF]) with different percentages by volume (0.5%, 1%, and 1.5%) and crumb rubber ...
Carbonation Depth and Permeability of Quaternary Hybrid Fiber Concretes
(American Society of Civil Engineers (ASCE), 2022)
Concrete structures are exposed to water throughout their service life. Nowadays, fiber-reinforced concrete is the most preferred concrete due to its superior mechanical properties. However, good mechanical properties alone ...
Investigation of the Effect of Alkali Curing on the Strength Properties of GBFS-Added Composites
(American Society of Civil Engineers (ASCE), 2022)
Large amounts of waste products have been and most probably will continue to be produced with urbanization, industrialization, and technological developments. The study presented herein is devoted to using blast furnace ...
Properties of Slightly Alkali-Activated Electric Arc Furnace Slag Concretes and Statistical Evaluation
(Springer, 2022)
Electric arc furnace slag (EAFS) is a material that emerges as a by-product in iron and steel plants and is in need of evaluation. To ensure its recovery by using it in concrete production, it was replaced 10%, 20% and 30% ...
High-temperature effect on mechanical properties of fiber reinforced concretes including waste tire rubber
(Wiley, 2023)
In this paper, concretes including three different fiber types (carbon steel fiber [CSF], forta ferro fiber [FFF], and polypropylene fiber [PPF]) with different percentages by volume (0.5%, 1%, and 1.5%) and crumb rubber ...