Ara
Toplam kayıt 12, listelenen: 1-10
Performance optimization of hybrid fiber concrete according to mechanical properties
(Elsevier, 2020)
In this research, interactional effects of four different fiber types, (steel, glass, synthetic and polypropylene) fly ash replacement ratio with cement, electrical arc furnace slag replacement ratio with natural aggregate ...
A Nondestructive Method for Determining Fiber Content and Fiber Ratio in Concretes Using a Metamaterial Sensor Based on a V-Shaped Resonator
(Springer, 2019)
A micro sensor based on a V-shaped resonator (VSR) is implemented for the purpose of determining fiber content and ratio in construction materials as a nondestructive method. Concrete is investigated as the construction ...
Failure analysis of newly constructed RC buildings designed according to 2007 Turkish Seismic Code during the October 23, 2011 Van earthquake
(Elsevier, 2016)
In the Van Earthquake of magnitude Mw = 7.2 on October 23, 2011, 48,666 buildings were severely damaged or collapsed, 604 people lost their lives and 1301 people were injured. During this earthquake, not only the buildings ...
Effects of milled cut steel fibers on the properties of concrete
(KSCE Journal of Civil Engineering, 2016)
This study presents the mechanical and transport properties of milled cut steel fiber reinforced concretes (MCSFRC). Properties studied include unit weight, workability, compressive strength, flexural strength, splitting ...
Uniaxial stress-strain relation for low- and normal-strength concrete in compression
(ICE Publishing, 2021)
In the modelling and simulation of reinforced concrete structures, accurate definition of material properties is important in terms of obtaining precise results. Among the parameters defining the behaviour of concrete in ...
An investigation on behavior of RC frames with non-interacting infill wall
(Elsevier, 2021)
Infill walls, which are generally assumed as dead loads in building design, affect the lateral resistance, stiffness, and energy consumption of the frames. Investigations conducted after earthquakes show that the infill ...
High-temperature effect on mechanical properties of fiber reinforced concretes including waste tire rubber
(Wiley, 2022)
In this paper, concretes including three different fiber types (carbon steel fiber [CSF], forta ferro fiber [FFF], and polypropylene fiber [PPF]) with different percentages by volume (0.5%, 1%, and 1.5%) and crumb rubber ...
Self-sensing reinforced concrete for damage assessment and real time strength development in smart structures
(Taylor and Francis, 2022)
In this study, a self-sensing smart structure was developed with a novel approach. Electromagnetic wave based self-sensing structure designed by sending waves to the reinforced concrete structure through the reinforcement ...
Carbonation Depth and Permeability of Quaternary Hybrid Fiber Concretes
(American Society of Civil Engineers (ASCE), 2022)
Concrete structures are exposed to water throughout their service life. Nowadays, fiber-reinforced concrete is the most preferred concrete due to its superior mechanical properties. However, good mechanical properties alone ...
Embedded smart sensor dipole antennas for real-time damage assessment, humidity, and temperature monitoring in reinforced and non-reinforced concrete structures
(Cambridge University Press, 2022)
In this study, a dipole antenna is designed for real-time damage assessment, humidity, and temperature monitoring in reinforced and non-reinforced concrete structures. The antenna-based sensor is embedded into reinforced ...