Ara
Toplam kayıt 10, listelenen: 1-10
Performance optimization of hybrid fiber concrete according to mechanical properties
(Elsevier, 2020)
In this research, interactional effects of four different fiber types, (steel, glass, synthetic and polypropylene) fly ash replacement ratio with cement, electrical arc furnace slag replacement ratio with natural aggregate ...
Utilization of boron waste borogypsum in mortar
(Elsevier, 2019)
In this study, mortars containing borogypsum (MCB) were investigated to understand the effect of borogypsum on mortars and if borogypsum could be used as a mineral admixture in the mortars. Borogypsum were replaced with ...
Effect of n-CaCO3 on fresh, hardened properties and acid resistance of granulated blast furnace slag added mortar
(Elsevier, 2020)
Nano size CaCO3 (n-CaCO3) particles were used as an additive into the Ground Granulated Blast Furnace Slag (GGBS) added mortar to investigate their effects on fresh, hardened properties and acid resistance. Setting time, ...
High-temperature effect on mechanical properties of fiber reinforced concretes including waste tire rubber
(Wiley, 2022)
In this paper, concretes including three different fiber types (carbon steel fiber [CSF], forta ferro fiber [FFF], and polypropylene fiber [PPF]) with different percentages by volume (0.5%, 1%, and 1.5%) and crumb rubber ...
Investigation of the Effect of Alkali Curing on the Strength Properties of GBFS-Added Composites
(American Society of Civil Engineers (ASCE), 2022)
Large amounts of waste products have been and most probably will continue to be produced with urbanization, industrialization, and technological developments. The study presented herein is devoted to using blast furnace ...
Properties of Slightly Alkali-Activated Electric Arc Furnace Slag Concretes and Statistical Evaluation
(Springer, 2022)
Electric arc furnace slag (EAFS) is a material that emerges as a by-product in iron and steel plants and is in need of evaluation. To ensure its recovery by using it in concrete production, it was replaced 10%, 20% and 30% ...
Pull-out capacity prediction of sustainable cementitious composites with artificial intelligence and statistical methods
(Wiley, 2023)
Concrete is used with reinforcement in structures so adherence gains importance especially in fire scenarios. To contribute production of sustainable concrete, by-products like granulated blast furnace slag, fly ash, and ...
High-temperature effect on mechanical properties of fiber reinforced concretes including waste tire rubber
(Wiley, 2023)
In this paper, concretes including three different fiber types (carbon steel fiber [CSF], forta ferro fiber [FFF], and polypropylene fiber [PPF]) with different percentages by volume (0.5%, 1%, and 1.5%) and crumb rubber ...
Investigation of the effect of curing and high temperature on the strength of copolymer added geopolymer mortars
(Taylor and Francis, 2023)
Cracks that occur in geopolymer mortars under the influence of high temperature cause a decrease in strength. In this study, ethylene and methyl-acrylate copolymer-based phase change material added (5%, 10% and 15% by mass) ...
Statistical Investigation of the Effects of w/c, Cement Dosage and Fibers on Bond Strength and Carbonation Coefficient of Hybrid Fiber Concretes
(Korean Society of Civil Engineers, 2023)
Fiber reinforced concretes are preferred due to high tensile strength in structural elements. Alongside to tensile strength, supplying good adherence with concrete and its durability against time are also expected properties. ...