Ara
Toplam kayıt 6, listelenen: 1-6
Microstructural alteration of alkali activated slag mortars depend on exposed high temperature level
(Elsevier, 2016)
This article reports a study on the microstructural and mechanical properties of the Alkali Activated Slag mortars (MS) upon exposing to the elevated temperatures up to 800 degrees C. Slag cement is activated by sodium ...
Utilization and efficiency of ground granulated blast furnace slag on concrete properties - A review
(Elsevier, 2016)
Ground granulated blast furnace slag (GGBFS) is a byproduct from the blast-furnaces of iron and it is a very beneficial in the mortar and concrete production. The present paper reviews the literature related to the utilization ...
Optimum design of alkali activated slag concretes for the low oxygen/chloride ion permeability and thermal conductivity
(Elsevier, 2016)
In this research, individual and interactional effect of curing temperature (CT), curing time (Crime), sodium concentration (SC) and silicate modulus (SM) on the compressive strength, chloride ion permeability, oxygen ...
Carbonation Depth and Permeability of Quaternary Hybrid Fiber Concretes
(American Society of Civil Engineers (ASCE), 2022)
Concrete structures are exposed to water throughout their service life. Nowadays, fiber-reinforced concrete is the most preferred concrete due to its superior mechanical properties. However, good mechanical properties alone ...
Investigation of the Effect of Alkali Curing on the Strength Properties of GBFS-Added Composites
(American Society of Civil Engineers (ASCE), 2022)
Large amounts of waste products have been and most probably will continue to be produced with urbanization, industrialization, and technological developments. The study presented herein is devoted to using blast furnace ...
Investigation of the effect of curing and high temperature on the strength of copolymer added geopolymer mortars
(Taylor and Francis, 2023)
Cracks that occur in geopolymer mortars under the influence of high temperature cause a decrease in strength. In this study, ethylene and methyl-acrylate copolymer-based phase change material added (5%, 10% and 15% by mass) ...