Ara
Toplam kayıt 46, listelenen: 1-10
Determination of physical properties of concrete by using microwave nondestructive techniques
(Applied Computational Electromagnetics Society (ACES), 2018)
Determination of the electrical properties of concretes with different water/cement ratios and investigation of the relationship between their electrical and mechanical properties is a promising technique towards improving ...
Microstructural alteration of alkali activated slag mortars depend on exposed high temperature level
(Elsevier, 2016)
This article reports a study on the microstructural and mechanical properties of the Alkali Activated Slag mortars (MS) upon exposing to the elevated temperatures up to 800 degrees C. Slag cement is activated by sodium ...
Performance optimization of hybrid fiber concrete according to mechanical properties
(Elsevier, 2020)
In this research, interactional effects of four different fiber types, (steel, glass, synthetic and polypropylene) fly ash replacement ratio with cement, electrical arc furnace slag replacement ratio with natural aggregate ...
Utilization of boron waste borogypsum in mortar
(Elsevier, 2019)
In this study, mortars containing borogypsum (MCB) were investigated to understand the effect of borogypsum on mortars and if borogypsum could be used as a mineral admixture in the mortars. Borogypsum were replaced with ...
Improving the aging resistance of bitumen by addition of polymer based diethylene glycol
(Elsevier, 2018)
This study deals with improving the short-term aging resistance of bitumen with a new material, a diethylene glycol based polyboron compound (DEGPB). The compound was synthesized chemically and used 50/70 penetration grade ...
A Nondestructive Method for Determining Fiber Content and Fiber Ratio in Concretes Using a Metamaterial Sensor Based on a V-Shaped Resonator
(Springer, 2019)
A micro sensor based on a V-shaped resonator (VSR) is implemented for the purpose of determining fiber content and ratio in construction materials as a nondestructive method. Concrete is investigated as the construction ...
Effect of n-CaCO3 on fresh, hardened properties and acid resistance of granulated blast furnace slag added mortar
(Elsevier, 2020)
Nano size CaCO3 (n-CaCO3) particles were used as an additive into the Ground Granulated Blast Furnace Slag (GGBS) added mortar to investigate their effects on fresh, hardened properties and acid resistance. Setting time, ...
The effect of curvature on transient analysis of laminated composite cylindrical shells on elastic foundation
(Pamukkale Üniversitesi, 2018)
This study presents the effect of curvature ratio on transient vibration analysis of simply supported antisymmetric thick cross-ply laminated composite shells (LCS) on elastic foundation. In the analysis, the foundation ...
Failure analysis of newly constructed RC buildings designed according to 2007 Turkish Seismic Code during the October 23, 2011 Van earthquake
(Elsevier, 2016)
In the Van Earthquake of magnitude Mw = 7.2 on October 23, 2011, 48,666 buildings were severely damaged or collapsed, 604 people lost their lives and 1301 people were injured. During this earthquake, not only the buildings ...
Determination of optimum post embedment depth for C120 steel posts using field and full scale crash test
(Taylor & Francis Ltd, 2019)
C120 steel sections are the most widely used post shapes in European guardrail designs. The design length of these posts is determined based on guardrail containment level and engineering judgment. The soil properties where ...