Başlık için Makale Koleksiyonu listeleme
Toplam kayıt 186, listelenen: 48-67
-
Effect of boronizing on microstructure, high-temperature wear and corrosion behavior of additive manufactured Inconel 718
(Elsevier, 2022)In this study, Ni-based Inconel 718 coatings were additively manufactured on the surface of AISI H13 work tool steel by electro-spark deposition (ESD). Some of the electro-spark deposited samples were boronized at 1000 ? ... -
Effect of borotitanizing on microstructure and wear behavior of Inconel 625
(Elsevier, 2017)Inconel 625, a nickel-based superalloy, is used in a wide range of applications including the marine and petroleum industries under where it is subjected to harsh conditions such as high temperatures and highly corrosive ... -
The effect of hexagonal boron nitride nanopowders addition on the mechanical behaviors of basalt fabric reinforced composites
(Emerald Publishing, 2023)PurposeThe purpose of this paper is to investigate the effect of doping element on the structural, thermal properties, mechanical performance and the failure mechanism of hexagonal nano boron nitride (h-BN)-reinforced ... -
The effect of hexagonal nano boron nitride on mechanical performances and machinability behaviors of basalt fabric reinforced epoxy composites
(SAGE Publications, 2021)The aim of this work is to investigate the effect of the hexagonal nano boron nitride (h-BN) doped epoxy on the mechanical performances and machinability behaviors of basalt fiber (BF) composites. The h-BN has used as a ... -
The effect of nanoparticle additive on surface milling in glass fiber reinforced composite structures
(SAGE Publications, 2021)In this study, the effect of adding nanosize additive to glass fiber reinforced composite plates on mechanical properties and surface milling was investigated. In the light of the investigations, with the addition of MWCNTs ... -
The Effect of Nonwoven Electrospun PAN Nanofiber Mat on Mechanical and Thermal Properties of Epoxy Composites
(2018)In this study mechanical and thermal properties of epoxy resin reinforced withdifferent numbers of nanofiber layers which produced with electrospinning method wasinvestigated. Solution of 10 wt% of polyacrylonitrile (PAN) ... -
Effect of powder-pack aluminizing on microstructure and oxidation resistance of wire arc additively manufactured stainless steels
(Elsevier, 2023)This study investigated the effect of powder-pack aluminizing treatment on the high-temperature oxidation of ER307 stainless steel components fabricated by wire arc additive manufacturing (WAAM) during isothermal oxidation ... -
Effect of the boriding environment on the wear response of laser-clad AlCoCrFeNi high entropy alloy coatings
(Elsevier, 2022)Laser-clad AlCrFeCoNi high entropy alloy (HEA) coatings, produced on the surface of AISI 316 L stainless steel, were pack-borided at 1000 °C for 4 h in open air, high-purity Ar and vacuum environments. The HEA, which had ... -
Effect of thermal degradation on the properties and wear behavior of Cr−V−C composite coatings grown on ductile iron
(Elsevier, 2021)The thermal fatigue behavior of chromium vanadium carbide (Cr - V - C) coatings and the wear of the coatings after thermal fatigue cycling was studied. The Cr - V - C coatings were grown on the surface of a ductile iron ... -
Effects of blast furnace slag (BFS) and cobalt-boron (Co-B) on hydrogen production from sodium boron hydride
(Elsevier, 2021)In the present paper, the blast furnace slag (BFS) supported Co-B catalyst were investigated in detail. The impregnation-chemical reduction method was used while hydrochloric (HCl) acid treated BFS samples (BFS+) were ... -
The Effects of Cutting Parameters on the Kerf and Surface Roughness on the Electrode in Electro Erosion Process
(Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 2021)Bu çalışmada elektro erozyon yöntemi ve Cupro MAX CuCrZr elektrot kullanılarak, ısıl işlem görmüş 60-62 HRC sertliğe sahip soğuk iş takım çeliğinden talaş kaldırma neticesinde meydana gelen elektrot aşınması incelenmiştir. ... -
The Effects of Cutting Parameters Used in Milling X153CrMoV12 Cold Work Tool Steel by End Mills on Surface Roughness and Hardness of The Workpiece
(Gazi Üniversitesi, 2022)The goal of this project is to investigate the effect of the spindle speed and feed rate used in milling X153CrMoV12 cold work steel by X5070 blue coated solid carbide end mill on surface roughness and hardness of the ... -
Effects of hydrogenation of fossil fuels with hydrogen and hydroxy gas on performance and emissions of internal combustion engines
(Elsevier, 2018)Energy security is an important consideration for development of future transport fuels. Among the all gaseous fuels hydrogen or hydroxy (HHO) gas is considered to be one of the clean alternative fuels. Hydrogen is very ... -
The effects of interface and matrix reinforcements on fracture toughness of E-Glass/epoxy laminate
(Institute of Physics Publishing, 2020)In this study, the effects of low amount (0.1 wt%) multi-walled carbon nanotube (MWCNTs) distributed homogenously in epoxy via cationic surfactant (cetyl pyridiniumchloride-CPC), polyacrylonitrile nanofiber (in the range ... -
The Effects of Using Brass and Copper Wires on the Cutting Quality of Sleipner Cold Work Steel Cut by WEDM
(Journal of Materials and Mechatronics, 2022)Wire electric discharge machining (WEDM) is widely used in dies, punches, aerospace and automotive sectors, since materials with high hardness, and temperature resistant, which are not possible to be cut with conventional ... -
Electricity production by wet type top-pressure recovery turbine in blast furnaces
(Pamukkale Üniversitesi, 2020)Today, the iron and steel industry is critical to energy consumption. The high energy demand of the iron and steel production process brings along high costs. This leads to the need to reduce energy demand and develop ... -
Electromagnetic Analysis of Organic Waste and Blust Furnace Slag Mixtures
(European Mechanical Science, 2021)In this experimental study, a composite structure was obtained by combining apple pulp wastes with slag wastes. Electromagnetic field characteristics of test samples have been determined. In the scope of the study, dry ... -
Electromagnetic Scattering Properties of MWCNTs/Graphene Doped Epoxy Layered with PVC Nanofiber/E-Glass Composites
(Springer, 2020)In this study, composites composed of glass fiber reinforced-epoxy laminates interleaved with electrospun polyvinylchloride (PVC) nano-fibres were designed for radar absorption investigations. The laminated composites which ... -
Empirical models for estimating the daily and monthly global solar radiation for Mediterranean and Central Anatolia region of Turkey
(Inderscience Enterprises, 2020)Climatology and geoengineering studies in literature clearly identify the relationship between solar radiation and global warming. These studies generally try to predict progress in global warming. To do that, it is essential ... -
Energy distribution analyses of an additional traction battery on hydrogen fuel cell hybrid electric vehicle
(Elsevier Ltd, 2019)Hydrogen is the most abundant element in the world and produces only water vapor as a result of chemical reaction that occurred in fuel cells. Therefore, fuel cell electric vehicles, which use hydrogen as fuel, continue ...
