Başlık için Makale Koleksiyonu listeleme
Toplam kayıt 186, listelenen: 146-165
-
Parametric Optimisation of an ORC in a Wood Chipboard Production Facility to Recover Waste Heat Produced from the Drying and Steam Production Process
(Mdpi, 2019)The wastes in wood industries (waste chips) are commonly used as fuel for burners to produce steam and to use the remaining heat in the drying process. However, in spite of that, there is a considerable amount of heat ... -
Parametric optimization and exergetic analysis comparison of subcritical and supercritical organic Rankine cycle (ORC) for biogas fuelled combined heat and power (CHP) engine exhaust gas waste heat
(Elsevier, 2016)In this paper, a subcritical and supercritical organic Rankine cycle (ORC) are designed to recover exhaust gas waste heat of biogas fuelled combined heat and power (CHP) engine. The CHP engine is located in Belgium and ... -
Performance & emission analysis of HHO enriched dual-fuelled diesel engine with artificial neural network prediction approaches
(Elsevier, 2020)Most of the studies on conventional fuel types that can be used in internal combustion engines have been made in order to improve performance values. Nowadays environmental problems have shown that emission values are more ... -
Performance & emission analysis of HHO enriched dual-fuelled diesel engine with artificial neural network prediction approaches
(Elsevier, 2020)Most of the studies on conventional fuel types that can be used in internal combustion engines have been made in order to improve performance values. Nowadays environmental problems have shown that emission values are more ... -
Performance analysis of a novel organic fluid filled regenerative heat exchanger used heat recovery ventilation (OHeX-HRV) system
(Elsevier, 2020)In this study, a novel organic fluid-filled regenerative heat exchanger used heat recovery ventilation (OHeX-HRV) system was designed. Five organic-based fluids (R11, R123, R245fa, n-Pentane and Isopentane) were selected ... -
Performance and environmental improvements of a geothermal power plant by using structural and operational modification techniques
(Institution of Chemical Engineers, 2023)Performance data from a geothermal power plant that uses a dry-type working fluid (n-Pentane) was evaluated. The experimental working conditions of the geothermal power plant were recorded. By using these recorded data the ... -
Performance improvement of the bottoming steam Rankine cycle (SRC) and organic Rankine cycle (ORC) systems for a triple combined system using gas turbine (GT) as topping cycle
(Elsevier, 2020)In the present study, performance improvement of SRC and ORC systems used as a bottoming system in a GT based triple combined system was evaluated for varying turbine inlet temperature and pressure. In the first step, SRC ... -
A perspective on hydrogen energy research, development and innovation activities in Turkey
(Wiley, 2020)Hydrogen can be considered as the most promising fuel towards the greenization. Developed and developing countries around the world have formed their research, investments and directives on hydrogen. The leading countries ... -
Pinch point determination and Multi-Objective optimization for working parameters of an ORC by using numerical analyses optimization method
(Elsevier, 2022)In parallel with Kyoto, Paris and the green production agreements, the nowadays crucial subject is minimising energy consumption, increasing renewable energy usage and recovering waste heat. When it comes to waste heat, ... -
The prediction of surface roughness and tool vibration by using metaheuristic-based ANFIS during dry turning of Al alloy (AA6013)
(Springer, 2022)In this article, the adaptive neuro-based fuzzy inference system (ANFIS) model is developed to estimate the surface roughness (Ra) and tool vibrations (Acc) of AA6013 aluminum alloy during dry turning. Turning experiments ... -
Production of Multi-Walled Carbon Nanotube and Graphene Doped Thermoplastic Polyurethane Fiber and Investigation of Mechanical Properties
(IOP Publishing, 2020)Nowadays nanofibers are used in many areas. Nanofibers produced by electrospinning are required to be porous, large surface area, lightweight and cost effective. In addition to being lightweight, nanofibers must also have ... -
Properties and Corrosion Behavior of Chromium and Vanadium Carbide Composite Coatings Produced on Ductile Cast Iron by Thermoreactive Diffusion Technique
(ASME, 2020)Ductile iron (DI) owes many of its attractive mechanical properties to the graphite nodules in its structure. However, since galvanic coupling can occur between the graphite nodules and the matrix in aggressive environments, ... -
Properties and Corrosion Resistance of AISI H13 Hot-Work Tool Steel with Borided B4C Powders
(Korean Institute of Metals and Materials, 2019)Abstract: In this study, the surface of AISI H13 steel was borided with powder blends of B4C and NaBF4 using the powder-pack method at 800, 900 and 1000 °C for 2, 4 and 6 h. The structural and mechanical characteristics ... -
Prospects of laser beam welding and friction stir welding processes for aluminum airframe structural applications
(Elsevier Ltd, 2018)The present study deals with laser beam welding (LBW) and friction stir welding (FSW) applied to high-strength aluminum alloys used in aircraft industry and displays their advantages compared with the riveting technique ... -
Prospects of producing aluminum parts by wire arc additive manufacturing (WAAM)
(Elsevier, 2022)In contrast to subtractive manufacturing processes, such as machining, and forming processes, additive manufacturing (AM), which is also called 3-D printing, direct digital manufacturing or free form fabrication, is a ... -
Quantized control settings based tuning of a heaving wave energy converter in irregular seas
(Taylor and Francis Inc., 2016)The increasing awareness of environmental issues attracts more attention on environmentally friendly energy sources. This leads to increasing research on effective use of renewable energy sources. Among them, wave energy ... -
Recent developments in computer vision and artificial intelligence aided intelligent robotic welding applications
(Springer, 2023)The welding process, which is an indispensable part of the manufacturing industry, has been in demand for years and continues to attract the attention of researchers. With the transition to Industry 4.0, the welding process ... -
Recent developments in joining of aluminum alloys
(Springer, 2017)The mass saving potential of light-weight materials, such as Al alloys, is beneficial for fuel economy and reducing CO2 emissions. However, the wide-spread use of these alloys has been long hindered due to the difficulty ... -
A Response Surface Modeling Study on Effects of Powder Rate and Machining Parameters on Surface Quality of CoCrMo Processed by Powder Mixed Electrical Discharge Machining
(Giresun Üniversitesi, 2023)Due to the high mechanical strength of the metals used in implant manufacture, which makes them difficult to work with using other machining techniques, electrical discharge machining (EDM) is frequently employed in the ... -
A review on drilling of FML stacks with conventional and unconventional processing methods under different conditions
(Elsevier, 2022)Fiber and metal materials used in Fiber Metal Laminate (FML) have different machinability properties due to their different structures. This case has made it a research topic to obtain good hole quality in these materials. ...
