Search
Now showing items 1-10 of 22
Deneysel bir organik Rankine çevriminde yapay sinir ağları (YSA) yardımıyla güç tahmini
(Selçuk Üniversitesi, 2016)
Organik Rankine çevrimlerinin güç tahmini için kullanılan simülasyon programlarında; sistem elamanlarının ideal yada ideale yakın olarak kabul edilen davranışlarının, gerçek davranışlarından farklı olmasından dolayı yüksek ...
The Effect of Nonwoven Electrospun PAN Nanofiber Mat on Mechanical and Thermal Properties of Epoxy Composites
(2018)
In this study mechanical and thermal properties of epoxy resin reinforced withdifferent numbers of nanofiber layers which produced with electrospinning method wasinvestigated. Solution of 10 wt% of polyacrylonitrile (PAN) ...
Investigation of electromagnetic properties of glass-fiber reinforced epoxy composites containing pan nanofibers with mwcnt/graphene additive
(Parlar Scientific Publications (P S P), 2019)
In this work; the differences between of electromagnetic properties of glass fiber reinforced (GFR)-epoxy laminate composites with various nanoparticle doped polyacrylonitrile (PAN) fibers were investigated. The laminated ...
Production of Multi-Walled Carbon Nanotube and Graphene Doped Thermoplastic Polyurethane Fiber and Investigation of Mechanical Properties
(IOP Publishing, 2020)
Nowadays nanofibers are used in many areas. Nanofibers produced by electrospinning are required to be porous, large surface area, lightweight and cost effective. In addition to being lightweight, nanofibers must also have ...
Wear Behavior of Borided AISI D2 Steel under Linear Reciprocating Sliding Conditions
(Pleiades Publishing, 2019)
AISI D2 steel is the most commonly used cold-work tool steel in its grade. In this study, microstructural characterization and some mechanical properties of borided AISI D2 steel samples were investigated. The boriding ...
Electromagnetic Scattering Properties of MWCNTs/Graphene Doped Epoxy Layered with PVC Nanofiber/E-Glass Composites
(Springer, 2020)
In this study, composites composed of glass fiber reinforced-epoxy laminates interleaved with electrospun polyvinylchloride (PVC) nano-fibres were designed for radar absorption investigations. The laminated composites which ...
The effects of interface and matrix reinforcements on fracture toughness of E-Glass/epoxy laminate
(Institute of Physics Publishing, 2020)
In this study, the effects of low amount (0.1 wt%) multi-walled carbon nanotube (MWCNTs) distributed homogenously in epoxy via cationic surfactant (cetyl pyridiniumchloride-CPC), polyacrylonitrile nanofiber (in the range ...
An Investigation on Cutting of the MWCNTs-Doped Composite Plates by AWJ
(Springer Heidelberg, 2020)
In this study, cutting of multi-walled carbon nanotubes (MWCNTs)-doped composite sheets by abrasive water jet machining (AWJM) and the effects of the water jet on cut composite materials were analyzed. The influence of ...
Katı Yakıtlı Roket ALP-01 Tasarımı, Modellemesi ve Simülasyonu
(Avrupa Bilim ve Teknoloji Dergisi, 2019)
Bu çalışmada katı yakıtlı alçak irtifa roketi ALP-01’in CAD tasarımı yapılmıştır. 1500 metre irtifa için roket boyutları; seçilen motor için optimize edilmiştir. Burun konisi geometrisi olarak Parabolik tip tercih edilmiş ...
Fatigue analysis of bolted flange joints of a rotary dryer
(Elsevier, 2016)
This paper describes the fatigue failure of a rotary dryer in a chemical plant. The process conditions required the dryer to be rotated continuously at a speed of about two and half revolutions per minute. The shell structure ...
