Search
Now showing items 1-10 of 31
Examining the receiver heat loss, parametric optimization and exergy analysis of a solar power tower (SPT) system
(Taylor & Francis, 2020)
Thanks to the studies on the material properties of the future solar tower systems and together with the developments in the material science, it has been observed that higher operating temperatures can be possible for SPT ...
Deep neural network approach to estimation of power production for an organic Rankine cycle system
(Springer, 2020)
In this study, the possibility of using Stepwise multilinear regression and deep learning models to estimate the behaviour of the organic Rankine cycle (ORC) has been investigated. It was found that a number of parameters ...
Recent developments in joining of aluminum alloys
(Springer, 2017)
The mass saving potential of light-weight materials, such as Al alloys, is beneficial for fuel economy and reducing CO2 emissions. However, the wide-spread use of these alloys has been long hindered due to the difficulty ...
Determinations of in-situ energy loss factors of point-connected composite plates
(Elsevier, 2016)
Statistical energy analysis is a widely used high frequency vibro-acoustic analysis tool. It is based on power flow balance between subsystems. Its accuracy mainly depends on precise determination of energy loss factors. ...
Properties and Corrosion Behavior of Chromium and Vanadium Carbide Composite Coatings Produced on Ductile Cast Iron by Thermoreactive Diffusion Technique
(ASME, 2020)
Ductile iron (DI) owes many of its attractive mechanical properties to the graphite nodules in its structure. However, since galvanic coupling can occur between the graphite nodules and the matrix in aggressive environments, ...
An investigation on optimum grinding system and conditions for steel plant ARP by-product α-Fe2O3 for pigment industry
(Elsevier, 2020)
After some other processes, α-Fe2O3 red powder particles -by-product of regeneration of spent pickling liquor in ARP in iron and steel industry- should be ground up to pigment grade to convert it to a value added product, ...
Microabrasion Wear Behavior of Fast-Borided Steel Tooth Drill Bits
(Taylor and Francis Inc., 2017)
In this study, the surface of steel tooth drill bits (Ni-Cr-Mo based) was subjected to the solid-state boriding treatment with 10- to 50-nm nanoboron powder. Boriding processes were carried out at a constant temperature ...
Microstructural and mechanical properties of friction stir welded pure lead
(National Institute of Science Communication and Information Resources (NISCAIR), 2018)
The present study focuses on the applicability of friction stir welding to pure Pb plates. The joint performances are evaluated by optical microscopy, microhardness measurements, notch impact tests and three point bending ...
Experimental study on accelerometer-based ladle slag detection in continuous casting process
(Springer London, 2020)
The share of continuous casting method is increased day by day among steel production methods. In continuous casting plants, steel production is carried out using BOF (basic oxygen furnace) or EAF (electric arc furnace). ...
Electromagnetic Scattering Properties of MWCNTs/Graphene Doped Epoxy Layered with PVC Nanofiber/E-Glass Composites
(Springer, 2020)
In this study, composites composed of glass fiber reinforced-epoxy laminates interleaved with electrospun polyvinylchloride (PVC) nano-fibres were designed for radar absorption investigations. The laminated composites which ...
