Ara
Toplam kayıt 43, listelenen: 1-10
An investigation on optimum grinding system and conditions for steel plant ARP by-product α-Fe2O3 for pigment industry
(Elsevier B.V., 2020)
After some other processes, ?-Fe2O3 red powder particles -by-product of regeneration of spent pickling liquor in ARP in iron and steel industry- should be ground up to pigment grade to convert it to a value added product, ...
The Effect of Nonwoven Electrospun PAN Nanofiber Mat on Mechanical and Thermal Properties of Epoxy Composites
(2018)
In this study mechanical and thermal properties of epoxy resin reinforced withdifferent numbers of nanofiber layers which produced with electrospinning method wasinvestigated. Solution of 10 wt% of polyacrylonitrile (PAN) ...
Tuning of LQR controller for an experimental inverted pendulum system based on The Bees Algorithm
(Vibromechanika, 2016)
Stabilizing of an inverted pendulum (IP) system is a main problem for researchers working on control theory. Balancing of an inverted pendulum system is one of the major benchmark problems in the control system community. ...
Deep neural network approach to estimation of power production for an organic Rankine cycle system
(Springer, 2020)
In this study, the possibility of using Stepwise multilinear regression and deep learning models to estimate the behaviour of the organic Rankine cycle (ORC) has been investigated. It was found that a number of parameters ...
Microstructure and mechanical properties of borided inconel 625 superalloy
(Universidade Federal do Rio de Janeiro, 2017)
The Ni-based superalloy Inconel 625 is extensively used owing to its high strength, excellent fabricability, good weldability and outstanding resistance to high temperature corrosion against aggressive environments. However, ...
An investigation on optimum grinding system and conditions for steel plant ARP by-product α-Fe2O3 for pigment industry
(Elsevier, 2020)
After some other processes, α-Fe2O3 red powder particles -by-product of regeneration of spent pickling liquor in ARP in iron and steel industry- should be ground up to pigment grade to convert it to a value added product, ...
A perspective on hydrogen energy research, development and innovation activities in Turkey
(Wiley, 2020)
Hydrogen can be considered as the most promising fuel towards the greenization. Developed and developing countries around the world have formed their research, investments and directives on hydrogen. The leading countries ...
Prospects of laser beam welding and friction stir welding processes for aluminum airframe structural applications
(Elsevier Ltd, 2018)
The present study deals with laser beam welding (LBW) and friction stir welding (FSW) applied to high-strength aluminum alloys used in aircraft industry and displays their advantages compared with the riveting technique ...
Boride Layer Growth Kinetics Of Aisi H13 Steel Borided With Nano-Sized Powders
(Polish Academy Sciences, Institute Metallurgy & Materials Sciences, 2018)
Growth kinetics of boride layers in AISI H13 steel was investigated using the pack bonding method at temperatures of 1073, 1173 and 1273 K (800 degrees C, 900 degrees C and 1000 degrees C) for periods of 2, 4 and 6 h with ...
Exergetic Simulation and Performance Analysis of the Effect of Flow Patterns in PEMFCs
(Int Center Applied Thermodynamics, 2019)
In this study, 6 different novel flow channels of the "proton exchange membrane" (PEM) type fuel cells were designed and modeled, while evaluations were conducted on three-dimensional channels of various designs using ...