Araştırma Çıktıları | Scopus İndeksli Yayınlar Koleksiyonu by İSTE Author "Kanca, Erdoğan"
Now showing items 1-20 of 20
-
Characterization of electrodeposited Ni-Cr/hBN composite coatings
Demir, Mehmet; Kanca, Erdoğan; Karahan, İsmail Hakkı (Elsevier, 2020)In this study, NieCr/hBN composite coatings with different hBN content were deposited on AISI 1040mild carbon steel using electrodeposition. The coatings were characterized using scanning electronmicroscopy (SEM), energy ... -
A Comparative Study on the Effects of Different Thermochemical Coating Techniques on Corrosion Resistance of STKM-13A Steel
Günen, Ali; Kanca, Yusuf; Karahan, İsmail Hakkı; Karakaş, Mustafa Serdar; Gök, Mustafa Sabri; Kanca, Erdoğan; Çürük, Ahmet (Springer, 2018)The corrosion resistances of three different thermochemical coatings (grown using titanizing, boriding, and borotitanizing treatments) applied to STKM-13A steel surfaces were investigated. The coatings were characterized ... -
Determination of Barreling of Aluminum Solid Cylinders During Cold Upsetting Using Genetic Algorithm
Kanca, Erdoğan; Eyercioğlu, Ömer; Günen, Ali; Demir, Mehmet (UNIV FED RIO DE JANEIRO, LAB HIDROGENIO, 2019)This study presents Genetic Programming models for the formulation of barreling of aluminum solid cylinders during cold upsetting based on experimental results. The maximum and minimum radii of the barreled cylinders having ... -
Dry sliding wear behavior of bonded hot-work tool steel at elevated temperatures
Gök, Mustafa Sabri; Küçük, Yılmaz; Erdoğan, Azmi; Öge, Mecit; Kanca, Erdoğan; Günen, Ali (Elsevier Science, 2017)In the present study, the surface of AISI H13 hot-work tool steel was bonded with EKabor II powders using powder pack-bonding method. The process was carried out at 800,900 and 1000 degrees C temperatures for 2,4 and 6 h ... -
Effect of boronizing on microstructure, high-temperature wear and corrosion behavior of additive manufactured Inconel 718
Kayalı, Yusuf; Kanca, Erdoğan; Günen, Ali (Elsevier, 2022)In this study, Ni-based Inconel 718 coatings were additively manufactured on the surface of AISI H13 work tool steel by electro-spark deposition (ESD). Some of the electro-spark deposited samples were boronized at 1000 ? ... -
Effect of borotitanizing on microstructure and wear behavior of Inconel 625
Günen, Ali; Kanca, Erdoğan; Çakır, Hüseyin; Karakaş, Mustafa Serdar; Gök, Mustafa Sabri; Küçük, Yılmaz; Demir, Mehmet (Elsevier, 2017)Inconel 625, a nickel-based superalloy, is used in a wide range of applications including the marine and petroleum industries under where it is subjected to harsh conditions such as high temperatures and highly corrosive ... -
The effect of nanoparticle additive on surface milling in glass fiber reinforced composite structures
Ceritbinmez, Ferhat; Kanca, Erdoğan; Yapıcı, Ahmet (SAGE Publications, 2021)In this study, the effect of adding nanosize additive to glass fiber reinforced composite plates on mechanical properties and surface milling was investigated. In the light of the investigations, with the addition of MWCNTs ... -
Effect of the boriding environment on the wear response of laser-clad AlCoCrFeNi high entropy alloy coatings
Günen, Ali; Lindner, Thomas; Karakaş, Mustafa Serdar; Kanca, Erdoğan; Töberling, Gerd; Vogt, Sabrina; Gök, Mustafa Sabri; Lampke, Thomas (Elsevier, 2022)Laser-clad AlCrFeCoNi high entropy alloy (HEA) coatings, produced on the surface of AISI 316 L stainless steel, were pack-borided at 1000 °C for 4 h in open air, high-purity Ar and vacuum environments. The HEA, which had ... -
Effect of thermal degradation on the properties and wear behavior of Cr−V−C composite coatings grown on ductile iron
Günen, Ali; Kanca, Erdoğan; Karakaş, Mustafa Serdar; Gök, Mustafa Sabri; Kalkandelen, Müge; Kurt, Bülent; Çetin, Melik; Karahan, İsmail Hakkı (Elsevier, 2021)The thermal fatigue behavior of chromium vanadium carbide (Cr - V - C) coatings and the wear of the coatings after thermal fatigue cycling was studied. The Cr - V - C coatings were grown on the surface of a ductile iron ... -
Effects of blanking speed on the shear surface of mild steel (St37)
Kanca, Erdoğan; Eyercioglu, Ömer; Karahan, İsmail Hakkı; Günen, Ali; Göv, Kürşad (Polish Academy of Sciences, 2016)Blanking operation is widely used to cut sheet or plates by a shearing process between punch and die. The process of shearing and the conditions of the sheared surface are influenced by the punch, the die, the speed of ... -
High temperature wear behavior of the surface-modified externally cooled rolls
Günen, Ali; Kanca, Erdoğan; Karakaş, Mustafa Serdar; Koç, Vahdettin; Gök, Mustafa Sabri; Kanca, Yusuf; Çürük, Ahmet; Demir, Mehmet (Elsevier, 2018)Externally cooled rolls of a steel plant were coated using three different surface modification techniques, namely titanizing, boronizing and borotitanizing. The grown coatings were examined using optical microscopy, ... -
An investigation on optimum grinding system and conditions for steel plant ARP by-product α-Fe2O3 for pigment industry
Karakaş, Özgür; Kanca, Erdoğan (Elsevier B.V., 2020)After some other processes, ?-Fe2O3 red powder particles -by-product of regeneration of spent pickling liquor in ARP in iron and steel industry- should be ground up to pigment grade to convert it to a value added product, ... -
An investigation on optimum grinding system and conditions for steel plant ARP by-product α-Fe2O3 for pigment industry
Karakaş, Özgür; Kanca, Erdoğan (Elsevier, 2020)After some other processes, α-Fe2O3 red powder particles -by-product of regeneration of spent pickling liquor in ARP in iron and steel industry- should be ground up to pigment grade to convert it to a value added product, ... -
Microabrasion Wear Behavior of Fast-Borided Steel Tooth Drill Bits
Günen, Ali; Kanca, Erdoğan; Demir, Mehmet; Er, Yusuf; Sağlam, Gökhan; Gök, Mustafa Sabri (Taylor and Francis Inc., 2017)In this study, the surface of steel tooth drill bits (Ni-Cr-Mo based) was subjected to the solid-state boriding treatment with 10- to 50-nm nanoboron powder. Boriding processes were carried out at a constant temperature ... -
Microstructural and mechanical properties of friction stir welded pure lead
Günen, Ali; Kanca, Erdoğan; Demir, Mehmet; Çavdar, Faruk; Mıstıkoğlu, Selçuk; Çam, Gürel (National Institute of Science Communication and Information Resources (NISCAIR), 2018)The present study focuses on the applicability of friction stir welding to pure Pb plates. The joint performances are evaluated by optical microscopy, microhardness measurements, notch impact tests and three point bending ... -
Microstructure and mechanical properties of borided inconel 625 superalloy
Günen, Ali; Kanca, Erdoğan (Universidade Federal do Rio de Janeiro, 2017)The Ni-based superalloy Inconel 625 is extensively used owing to its high strength, excellent fabricability, good weldability and outstanding resistance to high temperature corrosion against aggressive environments. However, ... -
Prediction of mechanical properties of cold rolled steel using genetic expression programming
Kanca, Erdoğan; Çavdar, Faruk; Erşen, M. M. (Polish Academy of Sciences, 2016)A new model was developed to predict the mechanical properties of St22 grade cold rolled deep drawing steel by gene expression programming. To obtain a dataset to find out the effect of reduction rate on the mechanical ... -
Surface integrity characteristics in wire-EDM of HfTaTiVZr refractory high entropy alloy
Ceritbinmez, Ferhat; Günen, Ali; Akhtar, Mst Alpona; Patel, Kunjal; Mukherjee, Sundeep; Yünlü, Lokman; Kanca, Erdoğan (Taylor and Francis Ltd., 2022)Refractory high entropy alloys (RHEAs) with multiple principal elements constitute a new paradigm in alloy design and have gained recent interest for advanced technical applications due to their unique properties and ... -
Wear Behavior of Borided AISI D2 Steel under Linear Reciprocating Sliding Conditions
Yapıcı, Ahmet; Aydın, S.E.; Koç, Vahdettin; Kanca, Erdoğan; Yıldız, Murat (Pleiades Publishing, 2019)AISI D2 steel is the most commonly used cold-work tool steel in its grade. In this study, microstructural characterization and some mechanical properties of borided AISI D2 steel samples were investigated. The boriding ... -
WEDM machining of MoNbTaTiZr refractory high entropy alloy
Günen, Ali; Ceritbinmez, Ferhat; Patel, Kunjal; Akhtar, Mst Alpona; Mukherjee, Sundeep; Kanca, Erdoğan; Karakaş, Mustafa Serdar (Elsevier, 2022)Refractory high entropy alloys (RHEAs) have shown great promise for a multitude of advanced engineering applications due to their high mechanical stability from cryogenic temperatures to 1600 °C. However, the low ductility ...
