Yazar "Kanca, Erdoğan" için Araştırma Çıktıları | TR-Dizin İndeksli Yayınlar Koleksiyonu listeleme
-
The Effects of Cutting Parameters on the Kerf and Surface Roughness on the Electrode in Electro Erosion Process
Ceritbinmez, Ferhat; Kanca, Erdoğan (Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 2021)Bu çalışmada elektro erozyon yöntemi ve Cupro MAX CuCrZr elektrot kullanılarak, ısıl işlem görmüş 60-62 HRC sertliğe sahip soğuk iş takım çeliğinden talaş kaldırma neticesinde meydana gelen elektrot aşınması incelenmiştir. ... -
The Effects of Cutting Parameters Used in Milling X153CrMoV12 Cold Work Tool Steel by End Mills on Surface Roughness and Hardness of The Workpiece
Ceritbinmez, Ferhat; Kanca, Erdoğan (Gazi Üniversitesi, 2022)The goal of this project is to investigate the effect of the spindle speed and feed rate used in milling X153CrMoV12 cold work steel by X5070 blue coated solid carbide end mill on surface roughness and hardness of the ... -
The Effects of Using Brass and Copper Wires on the Cutting Quality of Sleipner Cold Work Steel Cut by WEDM
Ceritbinmez, Ferhat; Kanca, Erdoğan (Journal of Materials and Mechatronics, 2022)Wire electric discharge machining (WEDM) is widely used in dies, punches, aerospace and automotive sectors, since materials with high hardness, and temperature resistant, which are not possible to be cut with conventional ... -
Farklı bor kimyasalları ile borlanmış Inconel 625 alaşımının karakterizasyonu
Günen, Ali; Kanca, Erdoğan (Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 2017)Bu çalışmada, nikel bazlı süper alaşımlar içerisinde endüstride yaygın olarak kullanılan Inconel 625 alaşımı 3 farklı borlama tozu ile borlanmıştır. Kullanılan borlama tozları, %90 elementel nano bor tozu + %10 NaBF4 (NB), ... -
Investigations on machinability of Al2O3 reinforced Al6061 metal matrix composites
Kanca, Erdoğan; Günen, Ali (Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 2016)In this study, six different MMCs containing Al6061 matrix and Al2O3reinforcements with particle sizes of 32 µm and 66 µm and weight fraction of 10%, 15% and 20% were produced using the vortex method. Machinability ... -
A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM
Kanca, Erdoğan; Taşkın, Volkan Cem; Günen, Ali (Sakarya University Journal of Science, 2019)The Wire Electrical Discharge Machining (Wire EDM) is widely used in the cutting of Bulk Continuous Filament (BCF) spinneret molds. Because of the low surface roughness of the spinneret molds obtained by the Wire EDM method, ... -
MRR, EWR and KERF Analysis in cold work tool steel machining in EDM method by copper and brass electrode
Ceritbinmez, Ferhat; Gökkaya, Elif Simay; Kanca, Erdoğan (Osmaniye Korkut Ata Üniversitesi, 2023)In this study, holes were drilled on the Sleipner cold work tool steel with a hardness of 60-62 HRC by copper and brass electrodes using three different current values (50, 25, 12.5 A), pulse on times (3, 6, 9 μs) and pulse ... -
A Response Surface Modeling Study on Effects of Powder Rate and Machining Parameters on Surface Quality of CoCrMo Processed by Powder Mixed Electrical Discharge Machining
Yıldız, Can; Çavdar, Faruk; Kanca , Erdoğan (Giresun Üniversitesi, 2023)Due to the high mechanical strength of the metals used in implant manufacture, which makes them difficult to work with using other machining techniques, electrical discharge machining (EDM) is frequently employed in the ... -
St 22 Çeliğinin Derin Çekilebilirliğine Etki Eden Parametrelerin ANOVA ile Analizi
Kanca, Erdoğan; Günen, Ali (2018)Bu çalışmada soğuk haddelenmiş ve ardından galvanizlenmiş St 22 çeliğininkimyasal bileşimi, soğuk haddeleme öncesindeki sac kalınlığı ve mekaniközellikleri (akma ve çekme gerilmesi, % uzama) ile soğuk haddeleme ezmeoranının ...