Başlık için Araştırma Çıktıları | Web of Science listeleme
Toplam kayıt 1268, listelenen: 643-662
-
Investigation of electromagnetic properties of glass-fiber reinforced epoxy composites containing pan nanofibers with mwcnt/graphene additive
(Parlar Scientific Publications (P S P), 2019)In this work; the differences between of electromagnetic properties of glass fiber reinforced (GFR)-epoxy laminate composites with various nanoparticle doped polyacrylonitrile (PAN) fibers were investigated. The laminated ... -
Investigation of electromagnetic shielding properties of metal composite tufted carpets
(Taylor & Francis Ltd, 2020)In this research, it is aimed to develop tufted carpets with electromagnetic shielding (EMSE) effectiveness. For this purpose, stainless steel, copper, silver wires, and metalized silver PA filaments were commingled with ... -
Investigation of EMI and UV-IR shielding properties of Kevlar and polyester/elastane nanocomposite fabrics coated by ECR and evaporation methods
(Taylor and Francis, 2023)In this study, it is aimed to investigate Electromagnetic Shielding Interference (EMI) and Ultraviolet-Infrared (UV-IR) shielding behavior of nanocomposite textile fabrics produced by using Electron Cyclotron Resonance ... -
Investigation of EMI and UV-IR shielding properties of wool and cotton/elastane nanocomposite fabrics
(Springer, 2023)In this study, the electromagnetic interference (EMI) and ultraviolet-infrared (UV-IR) shielding behavior of wool (WO) and cotton/elastane (CO/EL) nanocomposite fabrics have been investigated. The study aims to investigate ... -
Investigation of Fly Ash Effect on Rheological and Filtration Properties of Drilling Muds
(Parlar Scientific Publications (PSP), 2018)The aim of the present study is to improve rheological and filtration properties of water based drilling fluids by addition of fly ash and to investigate the physical and chemical properties of the additive and drilling ... -
Investigation of hepatoprotective effect of some algae species on carbon tetrachloride-induced liver injury in rats
(Taylor & Francis Ltd, 2020)The aim of this study was to investigate hepatoprotective effect of some algae species such as Spirulina platensis, Chlorella vulgaris, Laminaria japonica, Sargassum sp. on experimental acute hepatotoxicity model that ... -
The Investigation of K Shell X-Ray Fluorescence Parameters for Sulphur Atom in Different 1, 2, 4-Triazoles
(Office Spectroscopy and Spectral Analysis, 2017)The measurement of K shell fluorescence parameters is an easy and practical way to investigate the electronic structures of elements in alloys, compounds or complexes. Since the number of valence electrons will change the ... -
The investigation of K-shell fluorescence parameters of Zn-Fe alloys with different grain size and microstrain values
(Wiley, 2017)It is known that zinc alloys with iron group metals have better corrosion resistance than pure zinc. Owing to the corrosion resistance of these alloys, Zn-Fe coatings are widely used in automotive industry and have excellent ... -
Investigation of methanol contaminated local spirit using metamaterial based transmission line sensor
(Elsevier, 2021)A metamaterial-based transmission line sensor was designed to determine the amount of methanol in methanol-contaminated local spirit samples both numerically and experimentally. The proposed sensor consists of a square ... -
The investigation of microstructure and high temperature mechanical properties of novel Mg-Al-Sn-Ce alloy produced by HPDC
(Taylor and Francis, 2021)Different weight ratios of cerium (0.5, 1 and 2 wt.%) were produced in a controlled atmosphere by High Pressure Die Cast method to Mg-6Al-0.3Mn-1Sn alloy. The influence of cerium on microstructure and high-temperature ... -
Investigation of microstructure and mechanical properties of friction stir welded dissimilar St37/St52 joints
(Institute of Physics Publishing, 2019)Although friction stir welding (FSW) has widely been applied to aluminum alloys in several industries over the past three decades, it is not yet used in industry for joining of steels. The aim of this study is to characterize ... -
Investigation of microwave power limiter for Industrial Scientific Medical band (ISM) applications
(Wiley, 2020)In this paper, a new design of microstrip power limiter which is based on microstrip technology and zero bias Schottky diode is introduced. In this context, the FR-4 substrate that was characterized by dielectric permittivity ... -
An Investigation of Punching the MWCNTs Doped Composite Plates by Using Different Cutting Profiles
(University of Osijek, 2021)In this study, glass fiber reinforced composite layers which are with and without additives of 0.1 wt.% multi walled carbon nanotubes (MWCNTs) of epoxy were manufactured by vacuum infusion method. Unlike the conventional ... -
Investigation of Skirt Effect on Eccentrically Loaded Model Strip Footing Using Laboratory Tests
(Springer, 2021)In geotechnical engineering, the skirt shape is used to improve the load-settlement characteristics of eccentrically loaded shallow footings. The vertical and horizontal insertions of the rigid footing yield extra resistance ... -
Investigation of structural, magnetic and microwave absorption properties of NixCo1-xFe2O4/Ni:ZnO (x:0.0, 0.5, and 1.0) embedded epoxy composites
(Springer, 2022)In this study, NixCo1−xFe2O4/Ni:ZnO (x:0.0, 0.5, and 1.0) epoxy-based composite structures were manufactured by sol–gel method. The structural, morphological and magnetic characteristics were investigated using X-ray ... -
Investigation of the effect of addition of Ce (Cerium) to Mg-4Sb-2Al alloy produced by high pressure die casting method
(Gazi Üniversitesi, 2022)Purpose: In this study, it was produced with HPDC by adding Cerium rare element to Mg-4Sb-2Al alloy. The effect of Ce on mechanical properties was explained by the theories of microstructural transformation and new phase ... -
Investigation of the Effect of Alkali Curing on the Strength Properties of GBFS-Added Composites
(American Society of Civil Engineers (ASCE), 2022)Large amounts of waste products have been and most probably will continue to be produced with urbanization, industrialization, and technological developments. The study presented herein is devoted to using blast furnace ... -
Investigation of the effect of curing and high temperature on the strength of copolymer added geopolymer mortars
(Taylor and Francis, 2023)Cracks that occur in geopolymer mortars under the influence of high temperature cause a decrease in strength. In this study, ethylene and methyl-acrylate copolymer-based phase change material added (5%, 10% and 15% by mass) ... -
Investigation of the effects of urban density on Covid-19 pandemic
(Universita Studi di Napoli Federico II, 2021)Decisions regarding land use are amongst the most important decisions of a city planning process, and density arrangement is one of the key parameters for it. The effects of urban density on the Covid-19 infection are ... -
Investigation of the effects on rheological and filtration properties of water-based drilling mud of boron minerals: An experimental study
(Pamukkale University, 2019)The aim of this study is to determine the effect on the rheological and filtration properties of water based drilling fluid of boron minerals. For this purpose, water-based drilling mud was prepared and borax (Na2B4O7.10H2O) ...
