Ara
Toplam kayıt 23, listelenen: 11-20
Characterization and wear behavior of TiBC coatings formed by thermoreactive diffusion technique on AISI D6 steel
(Elsevier, 2020)
A two-step Thermo reactive diffusion processes (including an initial titatinizing step followed by boronizing) is proposed in order to obtain superhard complex TiBC coating layer on AISI D6 steel. Microstructural ...
Farklı bor kimyasalları ile borlanmış Inconel 625 alaşımının karakterizasyonu
(Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 2017)
Bu çalışmada, nikel bazlı süper alaşımlar içerisinde endüstride yaygın olarak kullanılan Inconel 625 alaşımı 3 farklı borlama tozu ile borlanmıştır. Kullanılan borlama tozları, %90 elementel nano bor tozu + %10 NaBF4 (NB), ...
Microstructure and mechanical properties of borided CoCrFeNiAl0.25Ti0.5 high entropy alloy produced by powder metallurgy
(Elsevier, 2021)
CoCrFeNiAl0.25Ti0.5 high entropy alloy alloys (HEA), produced by powder metallurgy were subjected to boriding to improve their mechanical properties. Sintering was carried out at 1200 degrees C for 2 h in Ar, and boriding ...
Microstructure, some mechanical properties and tribocorrosion wear behavior of boronized Al0.07Co1.26Cr1.80Fe1.42Mn1.35Ni1.10 high entropy alloy
(Elsevier, 2021)
High-entropy alloys (HEAs) with face-centered cubic (FCC) structures exhibit high toughness and corrosion resistance, but their average strengths and relatively low wear resistance can limit their engineering ap-plications. ...
Effect of Cr Addition on Properties and Tribological Behavior at Elevated Temperature of Boride Layers Grown on Borosintered Powder Metallurgy Alloys
(Korean Institute of Metals and Materials, 2022)
This study focused on chromium addition (0 wt%, 3 wt%, 6 wt%, 9 wt% and 12 wt%) on the boride layer formation, microhardness, fracture toughness and elevated temperature friction and wear behaviour of alloys formed by ...
Effect of boronizing on microstructure, high-temperature wear and corrosion behavior of additive manufactured Inconel 718
(Elsevier, 2022)
In this study, Ni-based Inconel 718 coatings were additively manufactured on the surface of AISI H13 work tool steel by electro-spark deposition (ESD). Some of the electro-spark deposited samples were boronized at 1000 ? ...
Effect of the boriding environment on the wear response of laser-clad AlCoCrFeNi high entropy alloy coatings
(Elsevier, 2022)
Laser-clad AlCrFeCoNi high entropy alloy (HEA) coatings, produced on the surface of AISI 316 L stainless steel, were pack-borided at 1000 °C for 4 h in open air, high-purity Ar and vacuum environments. The HEA, which had ...
Titanium carbide coating to improve surface characteristic, wear and corrosion resistance of spheroidal graphite cast irons
(Elsevier, 2022)
In this study, titanium carbide (TiC) coatings were grown on the surface of a spheroidal graphite cast iron (SGI) via thermo-reactive diffusion (TRD) using powder-pack processing at 800 °C, 850 °C and 900 °C for 4 h. The ...
Wire electric discharge machining and its effect on the surface finish of HfNbTaTiZr refractory high-entropy alloy
(Springer, 2023)
Refractory high-entropy alloys (RHEAs) have high strength and hardness but limited plasticity at room temperature, making them challenging to process and shape using conventional techniques. In the current study, HfNbTaTiZr ...
A new approach to improve some properties of wire arc additively manufactured stainless steel components: Simultaneous homogenization and boriding
(Elsevier, 2023)
Arc-directed energy deposition (Arc-DED), also commonly referred to as wire arc additive manufacturing (WAAM), is a cost-effective 3D metal additive manufacturing process in which large metallic parts can be produced due ...