Ara
Toplam kayıt 118, listelenen: 11-20
Examining the receiver heat loss, parametric optimization and exergy analysis of a solar power tower (SPT) system
(Taylor & Francis, 2020)
Thanks to the studies on the material properties of the future solar tower systems and together with the developments in the material science, it has been observed that higher operating temperatures can be possible for SPT ...
Utilization and efficiency of ground granulated blast furnace slag on concrete properties - A review
(Elsevier, 2016)
Ground granulated blast furnace slag (GGBFS) is a byproduct from the blast-furnaces of iron and it is a very beneficial in the mortar and concrete production. The present paper reviews the literature related to the utilization ...
Linear to left- and right-hand circular polarization conversion by using a metasurface structure
(Cambridge University Press, 2018)
By using a metasurface (MS) structure, a linearly polarized wave is converted to circularly polarized waves. Both right- and left-handed circular polarizations (RHCPs and LHCP) are obtained by a simple configuration in the ...
Performance optimization of hybrid fiber concrete according to mechanical properties
(Elsevier, 2020)
In this research, interactional effects of four different fiber types, (steel, glass, synthetic and polypropylene) fly ash replacement ratio with cement, electrical arc furnace slag replacement ratio with natural aggregate ...
Recent developments in joining of aluminum alloys
(Springer, 2017)
The mass saving potential of light-weight materials, such as Al alloys, is beneficial for fuel economy and reducing CO2 emissions. However, the wide-spread use of these alloys has been long hindered due to the difficulty ...
Utilization of boron waste borogypsum in mortar
(Elsevier, 2019)
In this study, mortars containing borogypsum (MCB) were investigated to understand the effect of borogypsum on mortars and if borogypsum could be used as a mineral admixture in the mortars. Borogypsum were replaced with ...
Second-order sliding mode control design and experimental application to a servo motor
(Institute of Electrical and Electronics Engineers Inc., 2017)
In this study, first-order and second-order sliding mode speed controller for the Precision Modular Servo (PMS) setup produced by Feedback Instruments is proposed. The second-order sliding mode controller which permits ...
Tunable perfect metamaterial absorber and sensor applications
(Springer, 2016)
Operation frequencies of traditional metamaterial absorbers are fixed meaning that it is not possible to change that frequency after the fabrication. Therefore, more studies are focused on the design of Tunable metamaterial ...
Improving the aging resistance of bitumen by addition of polymer based diethylene glycol
(Elsevier, 2018)
This study deals with improving the short-term aging resistance of bitumen with a new material, a diethylene glycol based polyboron compound (DEGPB). The compound was synthesized chemically and used 50/70 penetration grade ...
Sensitive Metamaterial Sensor for Distinction of Authentic and Inauthentic Fuel Samples
(Springer, 2017)
A metamaterial-based sensor has been realized to distinguish authentic and inauthentic fuel samples in the microwave frequency regime. Unlike the many studies in literature on metamaterial-based sensor applications, this ...