Konu "Concrete" için Araştırma Çıktıları | Web of Science İndeksli Yayınlar Koleksiyonu listeleme
Toplam kayıt 18, listelenen: 1-18
-
Capacitance-based stress self-sensing in asphalt without electrically conductive constituents, with relevance to smart pavements
(Elsevier, 2022)The capacitance-based stress self-sensing in asphalt without device or functional constituent incorporation is reported for the first time, with relevance to smart pavements. Stress sensing enables weighing. Without the ... -
DC electric polarization of cured cement paste being unexpectedly hindered by free water
(Wiley, 2021)Electric polarization is basic to the dielectric behavior, which is pertinent to the science and applications of cement-based materials. This work reports the dynamics of the DC-current-induced electric polarization/depolarization ... -
Detection and quantification of alkali-silica-reaction (ASR) gel in cement-based mortars using microwave spectral and temporal transmission properties
(Elsevier, 2023)Microwave transmission measurements in time-domain, as a new measurement tool, were carried out to detect and quantify alkali-silica-reaction (ASR) within mortar specimens. To examine the potential of time-domain transmission ... -
Effect of n-CaCO3 on fresh, hardened properties and acid resistance of granulated blast furnace slag added mortar
(Elsevier, 2020)Nano size CaCO3 (n-CaCO3) particles were used as an additive into the Ground Granulated Blast Furnace Slag (GGBS) added mortar to investigate their effects on fresh, hardened properties and acid resistance. Setting time, ... -
Experimental and theoretical behavior of cementitious plates containing ethylene vinyl acetate reinforced with glass woven fabric under impact load
(Sciendo, 2022)The paper is an analysis of the experimental and theoretical behavior of cementitious plate containing waste ethylene vinyl acetate (EVA) with and without reinforcement with glass fiber woven fabric (GFRP) under low-velocity ... -
High-temperature effect on mechanical properties of fiber reinforced concretes including waste tire rubber
(Wiley, 2022)In this paper, concretes including three different fiber types (carbon steel fiber [CSF], forta ferro fiber [FFF], and polypropylene fiber [PPF]) with different percentages by volume (0.5%, 1%, and 1.5%) and crumb rubber ... -
High-temperature effect on mechanical properties of fiber reinforced concretes including waste tire rubber
(Wiley, 2023)In this paper, concretes including three different fiber types (carbon steel fiber [CSF], forta ferro fiber [FFF], and polypropylene fiber [PPF]) with different percentages by volume (0.5%, 1%, and 1.5%) and crumb rubber ... -
Investigation of the Effect of Alkali Curing on the Strength Properties of GBFS-Added Composites
(American Society of Civil Engineers (ASCE), 2022)Large amounts of waste products have been and most probably will continue to be produced with urbanization, industrialization, and technological developments. The study presented herein is devoted to using blast furnace ... -
Investigation of the effect of curing and high temperature on the strength of copolymer added geopolymer mortars
(Taylor and Francis, 2023)Cracks that occur in geopolymer mortars under the influence of high temperature cause a decrease in strength. In this study, ethylene and methyl-acrylate copolymer-based phase change material added (5%, 10% and 15% by mass) ... -
Investigation of the mechanic, electromagnetic characteristics and shielding effectiveness of concrete with boron ores and boron containing wastes
(Elsevier, 2020)In this study, mechanical properties electromagnetic (EM), and shielding effectiveness of concrete samples containing boron product and wastes was investigated in details. In order to increase shielding effectiveness of ... -
Mechanical and electromagnetic performance of cement based composites containing different replacement levels of ground granulated blast furnace slag, fly ash, silica fume and rice husk ash
(Elsevier, 2020)In this study, cement additives were replaced with cement in mortar mixtures by mass. Mortar specimens were prepared with different additives and dosages which were mechanically and electromagnetically tested. According ... -
Metamaterial sensor application concrete material reinforced with carbon steel fiber
(World Scientific Publ Co Pte Ltd, 2020)In this paper, a rectangular split ring resonator-type metamaterial (MTM) sensor application is demonstrated in order to examine concrete materials. First, different types of concrete materials including carbon steel fiber ... -
MLR & ANN approaches for prediction of compressive strength of alkali activated EAFS
(Techno Press, 2018)In this study alkali activation of Electric Arc Furnace Slag (EAFS) is studied with a comprehensive test program. Three different silicate moduli (1-1,5-2), three different sodium concentrations (4%-6%-8%) for each silicate ... -
Production of new electromagnetic wave shielder mortar using waste mill scales
(Elsevier, 2020)Electromagnetic (EM) wave shielder mortar can be produced by mixing cement, natural limestone, tap water with mill scale (mill scale-I and mill scale-II) which is one of the biggest disposal area problems of the iron-steel ... -
Pullout capacity development of cast in place anchors with embedded studs
(Elsevier, 2016)In this study, an experimental investigation was conducted on normal strength concrete to examine the pullout capacity variation of cast in place anchors with the embedded circular surrounding studs around the anchored ... -
A socio-ecological approach to improve industrial zones towards eco-industrial parks
(Academic Press Ltd- Elsevier Science Ltd, 2019)One of the concrete examples of industrial symbiosis development is eco-industrial parks, which improves resource efficiency and minimizes environmental impacts by adopting models for waste exchanges between industries. ... -
Synergetic effect of waste tire rubber and mil scale on electromagnetic wave attenuation properties of new generation mortar
(Elsevier, 2020)In this study, the behaviors of cement based building materials containing a certain amount of crumb rubbers (CR) and mill scales as additives were explored. For this purpose, five different CR content by volume of the ... -
Utilization of boron waste borogypsum in mortar
(Elsevier, 2019)In this study, mortars containing borogypsum (MCB) were investigated to understand the effect of borogypsum on mortars and if borogypsum could be used as a mineral admixture in the mortars. Borogypsum were replaced with ...