Yayın tarihi için Makale Koleksiyonu listeleme
Toplam kayıt 29, listelenen: 1-20
-
Fatigue analysis of girth gear of a rotary dryer
(Elsevier, 2016)This paper describes the fatigue failure of girth gear manufactured from low alloy cast steel of rotary dryer in a chemical plant. The cracks of T-section web of the girth gear occurred at the end of 25 year working period ... -
Fatigue analysis of bolted flange joints of a rotary dryer
(Elsevier, 2016)This paper describes the fatigue failure of a rotary dryer in a chemical plant. The process conditions required the dryer to be rotated continuously at a speed of about two and half revolutions per minute. The shell structure ... -
Simultaneous Longitudinal and Lateral Flight Control Systems Design for Both Passive and Active Morphing TUAVs
(Kauno Technologijos Universitetas, 2017)In this article, simultaneous longitudinal and lateral flight control systems design for both passive and active morphing tactical unmanned aerial vehicles (TUAVs) is first time applied for autonomous flight performance ... -
Simultaneous tailplane of small UAV and autopilot system design
(Emerald Group Publishing Ltd, 2019)Purpose The purpose of this paper is to rise the autonomous flight performance of the small unmanned aerial vehicle (UAV) using simultaneous tailplane of UAV and autopilot system design. Design/methodology/approach A small ... -
Analysis of combined passively and actively morphing blade root chord length and blade taper for helicopter control
(Emerald Group Publishing Ltd, 2019)Purpose The purpose of this study is to examine the effect of passive and active morphing of blade root chord length and blade taper on the control effort of the flight control system (FCS) of a helicopter. Design/method ... -
Effects of the actively morphing root chord and taper on helicopter energy
(Emerald Group Publishing Ltd, 2019)Purpose The purpose of this paper presents the effects of actively morphing root chord and taper on the energy of the flight control system (i.e. FCS). Design/methodology/approach Via regarding previously mentioned purposes, ... -
Different Autopilot Systems Design For a Small Fixed Wing Unmanned Aerial Vehicle
(Avrupa Bilim ve Teknoloji Dergisi, 2019)The aim of this study is to design an autopilot system for Unmanned Aerial Vehicle (UAV) in a small size and to compare the efficiency of the systems designed with different methods. For this purpose, linearized equations ... -
Katı Yakıtlı Roket ALP-01 Tasarımı, Modellemesi ve Simülasyonu
(Avrupa Bilim ve Teknoloji Dergisi, 2019)Bu çalışmada katı yakıtlı alçak irtifa roketi ALP-01’in CAD tasarımı yapılmıştır. 1500 metre irtifa için roket boyutları; seçilen motor için optimize edilmiştir. Burun konisi geometrisi olarak Parabolik tip tercih edilmiş ... -
Autonomous performance maximization of research-based hybrid unmanned aerial vehicle
(Emerald Group Publishing, 2020)Purpose This paper aims to investigate the autonomous performance optimization of a research-based hybrid unmanned aerial vehicle (i.e. HUAV) manufactured at Iskenderun Technical University. Design/methodology/approach To ... -
Variance constrained trajectory tracking for tandem-rotor helicopters
(Emerald Group Publishing Ltd, 2020)Purpose This paper aims to present novel results for trajectory tracking of tandem-rotor helicopters via variance-constrained controllers. Design/methodology/approach Regarding these purposes, linearized tandem-rotor ... -
Improving Autonomous Performance of a Passive Morphing Fixed Wing UAV
(Kauno Technologijos Universitetas, 2020)In this article, simultaneous longitudinal and lateral flight control systems design for both passive and active morphing unmanned aerial vehicles (UAVs) is first time applied for autonomous flight performance maximization. ... -
The effects of interface and matrix reinforcements on fracture toughness of E-Glass/epoxy laminate
(Institute of Physics Publishing, 2020)In this study, the effects of low amount (0.1 wt%) multi-walled carbon nanotube (MWCNTs) distributed homogenously in epoxy via cationic surfactant (cetyl pyridiniumchloride-CPC), polyacrylonitrile nanofiber (in the range ... -
Pasif Başkalaşımın Çıkış Varyansı Kısıtlı Kontrolcü İle Yönlendirilen İha Üzerinde Etkileri
(Avrupa Bilim ve Teknoloji Dergisi, 2020)Bu çalışma çıkış varyansı kısıtlı kontrolcü (OVC) ile yönlendirilen pasif başkalaşım yeteneğine sahip İHA’lar hakkında yeni sonuçlar sunmaktadır. Kanat ve kuyruk takımının uçak uzunlamasına ekseninde belli aralıklarda ... -
MWCNTs doped GFRPs drilling: crosscheck among holes obtained by alternative manufacturing methods
(Springer, 2021)In this study, the holes of glass fiber reinforced polymer (GFRP) and multi-walled carbon nanotubes (MWCNTs) doped GFRP composite materials were drilled using abrasive water jet (AWJ), CO2 laser cutting, orbital drilling, ... -
Electrically Driven VTOL Flying Car Designing and Aerodynamic Analysis
(Avrupa Bilim ve Teknoloji Dergisi, 2021)In this study, the design of the electric powered VTOL Flying car was made in the CAD program, and the longitudinal, vertical and lateral flight dynamics were examined and aerodynamic analysis was made. In the design, the ... -
MALE UAV selection in interval Type-2 fuzzy sets environment
(IOS Press BV, 2022)Unmanned Aerial Vehicles (UAVs) are increasingly used in the military field. Especially in recent years, UAVs have been a very effective instrument in gaining airspace superiority and military success. Many countries compete ... -
Simultaneous swept anhedral helicopter blade tip shape and control-system design
(Emerald Group Holdings Ltd., 2022)Purpose: This paper aims to offer a simultaneous design approach for helicopter having swept anhedral blade tip shape and helicopter flight control system (HFCS) to minimize controller cost. Design/methodology/approach: ... -
The Theoretical Value for the Tip Radius of Cracks and Notches
(Kauno Technologijos Universitetas, 2022)In this paper, an additional equation that can be used in conjunction with the Stress Intensity Factor is produced, enabling the determination of all critical fracture stresses, including tensile strength, from only one ... -
Using the Stress Concentration Factor in Determining the Fracture Toughness
(Kauno Technologijos Universitetas, 2022)This paper offers the use of stress concentration factor in determining the critical fracture stress and fracture toughness of polymeric composite materials at various crack length ratios. The stress intensity factor has ... -
A Novel Biomimetic Wing Design and Optimizing Aerodynamic Performance
(Edit Publishing, 2022)In this article, numerical and experimental analyzes were made by adding winglet and endless blade to the tip of the airfoil to improve the wind turbine blade performance. Similarly, the change in performance was investigated ...
