Şev Stabilitesi Probleminin Geri Analizle Çözümü: Örnek Bir Vaka
Citation
Ün, B., Yıldız, A. (2021). Şev Stabilitesi Probleminin Geri Analizle Çözümü: Örnek Bir Vaka. ACADEMIC PLATFORM-JOURNAL OF ENGINEERING AND SCIENCE, 9(1), 174 - 181. https://doi.org/10.21541/apjes.740867Abstract
Bu çalışmada bir şev stabilitesi problemi incelenmektedir. Şev üzerinde bir yol güzergâhı bulunmaktadır ve şevin göçme
potansiyeli yüksektir. Bu çalışmanın amacı, şevde güvenlik analizinde kullanılan programların tutarlılığının incelenmesi ve şev
hareketini önleyecek tasarımın belirlenmesidir. Bu amaçla, ilk olarak, şevin topoğrafik özellikleri belirlenmiş ve mevcut duruma
ait model oluşturulmuştur. Şev modeline ait verileri elde etmek için arazi ve laboratuvar çalışmalarından faydalanılmıştır. Geri
analiz yöntemi kullanılarak kayma yüzeyine ait parametreler elde edilmiştir. Mevcut durumu yansıtan model üzerinde, şevi
güvenli hale getirecek tasarım oluşturulmuştur. Analizler; sonlu elemanlar yöntemini esas alan Plaxis 2D (2018) ve limit denge
yöntemlerine dayanan Slide V.6.0. programları ile gerçekleştirilmiştir. Sonuç olarak, güvenlik analizi hesabında kullanılan
programlardan uyumlu sonuçlar elde edilmiştir. Ele alınan şev stabilitesi probleminde, iyileştirme yöntemi olarak fore kazıkla
destekleme uygun görülmüştür. Ek olarak drenaj yöntemleri ile yüzey sularının uzaklaştırılması önerilmiştir. In this study, a slope stability problem is investigated. There is a road route located on the slope and the slope has a high potential
to failure. The purpose of this study is to examine the consistency of programs used in slope safety analysis and to determine the
design that will prevent slope movement. For this purpose, firstly, topographic features of the slope were determined and then a
model of the current state was created. Field and laboratory studies were used to obtain the data of slope model. Parameters of
the failure surface were obtained by using back analysis method. Afterwards, a design that will make the slope safe was created
on the model which reflects the current state. Analysis was performed by using both Plaxis 2D (2018) ,which is based on finite
element method, and another program called Slide V.6.0. based on limit equilibrium methods. As a result, compatible results
were obtained from the programs used in the safety analysis calculation. In the slope stability problem discussed, supporting
with bored pile was considered appropriate as an improvement method. In addition, it was proposed to remove surface waters
by drainage method.
Source
ACADEMIC PLATFORM-JOURNAL OF ENGINEERING AND SCIENCEVolume
9Issue
1URI
https://doi.org/10.21541/apjes.740867https://hdl.handle.net/20.500.12508/2090
https://dergipark.org.tr/tr/pub/apjes/issue/57735/740867