Ara
Toplam kayıt 20, listelenen: 11-20
Electricity production by wet type top-pressure recovery turbine in blast furnaces
(Pamukkale Üniversitesi, 2020)
Today, the iron and steel industry is critical to energy consumption. The high energy demand of the iron and steel production process brings along high costs. This leads to the need to reduce energy demand and develop ...
The effects of interface and matrix reinforcements on fracture toughness of E-Glass/epoxy laminate
(Institute of Physics Publishing, 2020)
In this study, the effects of low amount (0.1 wt%) multi-walled carbon nanotube (MWCNTs) distributed homogenously in epoxy via cationic surfactant (cetyl pyridiniumchloride-CPC), polyacrylonitrile nanofiber (in the range ...
Determination of Barreling of Aluminum Solid Cylinders During Cold Upsetting Using Genetic Algorithm
(UNIV FED RIO DE JANEIRO, LAB HIDROGENIO, 2019)
This study presents Genetic Programming models for the formulation of barreling of aluminum solid cylinders during cold upsetting based on experimental results. The maximum and minimum radii of the barreled cylinders having ...
Microstructural and Mechanical Properties of Friction Stir Welded Nickel-Aluminum Bronze (NAB) Alloy
(Springer, 2016)
In this study, the applicability of friction stir welding to cast NAB alloy (i.e., C95800) with a thickness of 9 mm has been investigated. The joint performance was determined by conducting optical microscopy, microhardness ...
Artificial Intelligence Applications for Friction Stir Welding: A Review
(Korean Institute of Metals and Materials, 2020)
Advances in artificial intelligence (AI) techniques that can be used for different purposes have enabled it to be used in many different industrial applications. These are mainly used for modeling, identification, optimization, ...
Sıcak Presleme Yöntemi ile Üretilmiş Uçucu Kül Takviyeli Bronz Matrisli Fren Balata Malzemelerinin Sürtünme-Aşınma Özellikleri Üzerine Kolemanit Miktarının Etkisi
(Gazi Üniversitesi, 2016)
Bu çalışmada sıcak presleme yöntemi ile üretilen kütlece % 6 uçucu kül takviyeli bronz matrisli fren balata malzemesinin tribolojik özellikleri üzerine farklı oranlarda (% 0,5-4) ilave edilen kolemanit miktarının etkisi ...
An Investigation of Punching the MWCNTs Doped Composite Plates by Using Different Cutting Profiles
(University of Osijek, 2021)
In this study, glass fiber reinforced composite layers which are with and without additives of 0.1 wt.% multi walled carbon nanotubes (MWCNTs) of epoxy were manufactured by vacuum infusion method. Unlike the conventional ...
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
(Elsevier, 2021)
The unique combination of very large strains, high temperatures and high strain rates inherent to friction stir welding (FSW) and friction stir processing (FSP) and their dependency on the processing parameters provides ...
Compressive strength prediction models for cementitious composites with fly ash using machine learning techniques
(Elsevier, 2021)
In this study, it was proposed a novel prediction model to predict compressive strength of mortar samples having different properties. For this purpose, 8 different fly ashes were used in mortar mixture as a replacement ...
Characterization of electrodeposited Ni-Cr/hBN composite coatings
(Elsevier, 2020)
In this study, NieCr/hBN composite coatings with different hBN content were deposited on AISI 1040mild carbon steel using electrodeposition. The coatings were characterized using scanning electronmicroscopy (SEM), energy ...