Ara
Toplam kayıt 26, listelenen: 1-10
Farklı kalınlıktaki AA6061-T6 levhaların sürtünme karıştırma kaynağı için uygun kaynak parametrelerinin belirlenmesi
(Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, 2018)
Bu çalışmada, dört farklı kalınlıktaki AA6061-T6 levhaların sürtünme karıştırma kaynağı ile hatasız birleştirilebilmesi için kullanılması gereken kaynak parametreleri belirlenmeye çalışılmıştır. Bu amaçla, her bir levha ...
Sürtünme Karıştırma Kaynağıyla Birleştirilen St37/St52 Levhaların Mikroyapı Karakterizasyonu ve Mekanik Özellikleri
(2018)
Sürtünme Karıştırma Kaynağı (SKK), geçtiğimiz otuz yılda çeşitli endüstrilerde alüminyum alaşımlarına başarı ile uygulanmaktadır. Fakat çeliklerin kaynağında, bu işlemlerde açığa çıkan sıcaklıklara dayanabilecek karıştırıcı ...
Formation of weld defects in cold metal transfer arc welded 7075-T6 plates and its effect on joint performance
(Institute of Physics Publishing, 2019)
This study aims at investigating the formation of weld defects (i.e., pores) and determining the effect of pores on mechanical performance of the AA7075-T6 plate joints produced using cold metal transfer (CMT) gas metal ...
Investigation of mechanical and microstructural properties of friction stir welded dual phase (DP) steel
(Institute of Physics Publishing, 2019)
The application of dual phase (DP) steels has been increasing significantly in the automotive industry because of their high strength as well as good ductility, thus, cold formability. These steels are generally joined ...
Applicability of friction stir welding to steels
(International OCSCO World Press, 2017)
Purpose: The friction stir welding (FSW) method is widely considered to be one of the most significant developments in joining technology to emerge in the last 30 years. The technique has originally been developed for ...
Investigation of microstructure and mechanical properties of friction stir welded dissimilar St37/St52 joints
(Institute of Physics Publishing, 2019)
Although friction stir welding (FSW) has widely been applied to aluminum alloys in several industries over the past three decades, it is not yet used in industry for joining of steels. The aim of this study is to characterize ...
Recent developments in joining of aluminum alloys
(Springer, 2017)
The mass saving potential of light-weight materials, such as Al alloys, is beneficial for fuel economy and reducing CO2 emissions. However, the wide-spread use of these alloys has been long hindered due to the difficulty ...
Prospects of laser beam welding and friction stir welding processes for aluminum airframe structural applications
(Elsevier Ltd, 2018)
The present study deals with laser beam welding (LBW) and friction stir welding (FSW) applied to high-strength aluminum alloys used in aircraft industry and displays their advantages compared with the riveting technique ...
Microstructural and mechanical properties of friction stir welded pure lead
(National Institute of Science Communication and Information Resources (NISCAIR), 2018)
The present study focuses on the applicability of friction stir welding to pure Pb plates. The joint performances are evaluated by optical microscopy, microhardness measurements, notch impact tests and three point bending ...
Microstructure and mechanical properties of friction-stir welded St52 steel joints
(Springer, 2018)
The aim of this work is to investigate the mechanical properties and microstructures of friction-stir welded (FSWed) St52 structural steel joints. In this study, St52 steel plates with a thickness of 4 mm were butt-welded ...