Ara
Toplam kayıt 9, listelenen: 1-9
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
(Elsevier, 2021)
The unique combination of very large strains, high temperatures and high strain rates inherent to friction stir welding (FSW) and friction stir processing (FSP) and their dependency on the processing parameters provides ...
Microstructure and mechanical properties of borided CoCrFeNiAl0.25Ti0.5 high entropy alloy produced by powder metallurgy
(Elsevier, 2021)
CoCrFeNiAl0.25Ti0.5 high entropy alloy alloys (HEA), produced by powder metallurgy were subjected to boriding to improve their mechanical properties. Sintering was carried out at 1200 degrees C for 2 h in Ar, and boriding ...
Microstructure and mechanical properties of gas metal arc welded AISI 430/AISI 304 dissimilar stainless steels butt joints
(IOP Publishing, 2021)
Nowadays, there is an increasing demand for the use of joining dissimilar metals in various industrial applications owing to the economic benefits and better joint performance. Ferritic stainless steel grades is a good ...
Significant enhancement of superconducting performances of Bi-2212 fibers through combined sodium substitution and LFZ process
(Springer, 2021)
This paper reports the microstructure, magnetoresistivity, electrical and superconducting properties of Bi-2212 fibers with Na+ ions incorporated into a superconducting matrix prepared by a polymer solution method and ...
Thermal analysis and wear behavior of shell mold cast and graphite mold cast Mg-4Zn-(x)Zr alloys
(CSIC Consejo Superior de Investigaciones Cientificas, 2021)
The grain refining effect of Zirconium (Zr) is known, nevertheless the effect of Zr amount and its effect on solidification and wear behavior of modified Mg-Zn alloys has not been adequately studied. Mg-4Zn-(x)Zr alloys ...
A Study on Analysis of Sinter Microstructure and Phase Morphology
(Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 2021)
Sinter is a blast furnace input material obtained by temperature to 900-1200 oC without full melting and adhering to each other with superficial melting. It is considered as a multi-phase material with its heterogeneous ...
The investigation of microstructure and high temperature mechanical properties of novel Mg-Al-Sn-Ce alloy produced by HPDC
(Taylor and Francis, 2021)
Different weight ratios of cerium (0.5, 1 and 2 wt.%) were produced in a controlled atmosphere by High Pressure Die Cast method to Mg-6Al-0.3Mn-1Sn alloy. The influence of cerium on microstructure and high-temperature ...
Microstructure, some mechanical properties and tribocorrosion wear behavior of boronized Al0.07Co1.26Cr1.80Fe1.42Mn1.35Ni1.10 high entropy alloy
(Elsevier, 2021)
High-entropy alloys (HEAs) with face-centered cubic (FCC) structures exhibit high toughness and corrosion resistance, but their average strengths and relatively low wear resistance can limit their engineering ap-plications. ...
AISI 304 Östenitik Paslanmaz Çelik Levhaların TIG Kaynağı ile Birleştirilmesinde Farklı Koruyucu Gaz Tiplerinin Mekanik Özelliklerine Etkisi
(Journal of Materials and Mechatronics:A (Online), 2021)
AISI 304 kalite Östenitik paslanmaz çelikler, paslanmaz çelikler arasında en çok kullanılan kalitelerden biridir. Kimyasal bileşimin ve mekanik özellikleri sayesinde kolay işlenebilir ve şekil alabilir olması, kaynaklanabilme ...